Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2013
    Location
    victoria
    Posts
    4

    Default Finish for brushbox

    Hi, just bought some Brushbox flooring to make a desk top. Was considering using a burnishing oil,any thought's or advice on this? was looking at synteko natural oil. Will add some photo's soon as I can upload them.

  2. #2
    Join Date
    Jan 2005
    Location
    Sydney
    Posts
    191

    Default

    Better off with a solvent sealer then follow with a top coat either water or poly, brush box acts funny needs a solvent sealer to bring colours out

  3. #3
    Join Date
    Jun 2013
    Location
    victoria
    Posts
    4

    Default

    Middle pic is raw and the other's are just rubbed with some turp's, what sort of color will the burnishing oil bring out? just looking for opinion's and advice as I want to make the most of it and get a durable finish. what grit should I go down to?

    so any advice will be greatly appreciated, I have a couple of sander's to use too, Festo rectangular orbital,and air orbital disc sander,a 9inch polisher.



    brushboxturps1.jpgbrushbox1.jpgbrushboxturps2.jpg

  4. #4
    Join Date
    Jun 2013
    Location
    victoria
    Posts
    4

    Default

    Thank's, I was originally thinking of simply wood care floor gloss,used it in the past on a floor.but was hoping for something easy to maintain and touch up.

  5. #5
    Join Date
    Jun 2013
    Location
    victoria
    Posts
    4

    Default

    How would it look burnished?

Similar Threads

  1. finish for brushbox,blackwood table.
    By slow but ruff in forum FINISHING
    Replies: 11
    Last Post: 20th September 2011, 12:15 PM
  2. Aus Brushbox or Malaysian Brushbox
    By Jen26 in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 0
    Last Post: 7th February 2008, 07:18 PM
  3. brushbox
    By Bluegum in forum FINISHING
    Replies: 2
    Last Post: 28th December 2005, 01:51 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •