Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
5th April 2013, 10:03 AM #1SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Gippsland Victoria
- Posts
- 554
Automatic Dust Extraction - Bumped thread
Hello,
Did a forum search and found the thread below - tried to bump it but unable to because it is too old.
( https://www.woodworkforums.com/f200/a...traction-1799/ )
Hence this new post.
I like the idea of the remote control for the Dust Extractor power point
Some sort of relay would also work for me
Any new ideas or products since this thread was first started ?
Whats sort of key words should I be using in forum searches and googling for this topic - found very few results.
Am using a Carba Tec double bag and Triton work station and home made drum sander.
Does it damage the dust extractor motor to leave it permanently switched on and then control it from the remote power point control ?
Remote Control Mains Switch Power Point 3 Outlets | eBay
BillLast edited by steamingbill; 5th April 2013 at 10:08 AM. Reason: added question at end
-
5th April 2013, 03:20 PM #2
-
5th April 2013, 03:49 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 24,746
-
5th April 2013, 04:18 PM #4