VFD XIN YEN wiring to C11 break out board

[kostas1]

Hi,
I am trying to figure out how to connect my VFD to C11 bob, with also taking into account the handling of on/off and speed of spindle from c11/Mach3.

Below is the .pdf link from a diagram I found but the VFD diagram has not the same pins with what actually my VFD has:
http://cnc4pc.com/Tech_Docs/C11G_Jinlan_VFD.pdf
The pins that my VFD has is the same as these in the attached photos.
Chai also sent to me the .doc manual(?) of the VFD (please see 3rd attachement)

Could you please help me figure out where I should connect the pins from C11 to my VFD in order to implement full control of VFD from C11/Mach3?

Thanks in advance.

ADDED BY ADMIN

DISCLAIMER

No liability is accepted by UBeaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradeperson for all electrical work.

WARNING

Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own risk