Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2005
    Location
    Melbourne - SE burbs
    Posts
    16

    Default T/P Structual - Help!

    I was all set to go with my structual T/P for my decking when the last 2 places said to use H3 wet sawn.
    Whilst it is a little cheaper, I'm not sure of the difference with the dry rougher header lasercut.
    Will the wet sawn warp over time?
    The guys at the timber yards said there's no problems using it for a decking.

  2. #2
    Join Date
    Oct 2007
    Location
    Cranebrook
    Posts
    10

    Default

    In some areas wet sawn decking is used. The boards are butted together and seperate as the timber shrinks. I would still prefer to have KD boards on my deck.

  3. #3
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    I've used both and it doesn't seem to make a difference
    Regards, Bob Thomas

    www.wombatsawmill.com

  4. #4
    Join Date
    Jul 2005
    Location
    Melbourne - SE burbs
    Posts
    16

    Default

    OK - I have ordered the structual timber and will be delivered this Friday.
    I went with the T/P dried, lasercut.

    Construction starts this weekend.....

    I have realised I posted this in the wrong thread.....
    Last edited by clackerz; 18th October 2007 at 08:41 AM. Reason: Double Post!

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •