![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 15 of 21
-
19th December 2020, 04:52 PM #1
Novice
- Join Date
- Dec 2020
- Location
- Australia
- Posts
- 11
Parker Dining table with odd coloured extensions
Hello Everyone.
I have a golden teak veneer MCM dining table that I’m attempting to renovate. Being a amateur I’ve taken the careful route (no electric sanding or stripper) and hand sanded the table top using 180, 240 and 320 grit, afterwards cleaning the table up with mentholated spirits and grade 2 steel wool.
The problem is the table top is golden teak but the two end extensions are dark. I can’t put it down to fading because it’s too radical.
I’ve tried to attach a photo to this post but can’t figure out how to do it.
Anyway, what are my options? I did want a golden teak which is pretty typical of MCM Parker.
Should I get the courage up and try stripping the two extensions back to the original. If that’s even possible.
If so what stripper do I use?
Was planning on mixing Cabots Danish Oil with Wattyl Craftsman Traditional Stain to achieve the golden teak finish.
Any suggestions would be much appreciated.
Von
-
19th December 2020, 05:24 PM #2
Member
- Join Date
- Jun 2015
- Location
- Sydney
- Posts
- 21
I still think that it is sun bleached, stripping it back probably won't change the colour. may need bleach the extender leaves to match.
-
19th December 2020, 06:58 PM #3
Someone must have re done the ends darker. The ends are normally the faded parts and the leaves which dont get used as much are stored away not getting as much light so stay darker.
Do some tests and see if the darkness strips off on a small patch . Some colour jobs are sitting on top of the old polish job. thats good if it is . Or some were striped and sanded then re stained dark . Thats not so good .
If its been re stained dark into the wood then you have to try and see if it will cabinet scrape off or sand off after stripping .
Just a gel stripper should be OK . Im using a new type for me . Anchor brand Professional One Shot Multi Layer Paint Stripper.
I like it .
I stain and get colour sorted then apply oil finish . Not mix together . What ever works though . I mix some colours with shellac if needed . Different thing .
Rob
-
20th December 2020, 06:36 AM #4
Novice
- Join Date
- Dec 2020
- Location
- Australia
- Posts
- 11
Here’s a better photo of the table
I took a better photo of the table. As you can see the colour I wanted was the existing golden teak like the top and body of the table.
I need advice on exactly how to finish this piece.
Many thanks for your help.
Von
-
20th December 2020, 06:44 AM #5
Novice
- Join Date
- Dec 2020
- Location
- Australia
- Posts
- 11
-
20th December 2020, 07:13 AM #6
Novice
- Join Date
- Dec 2020
- Location
- Australia
- Posts
- 11
Here’s another photo
I have hopefully uploaded another photo but who knows.
-
20th December 2020, 02:50 PM #7
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
I did not work for Parker although I did work for a "sister" company, on occasion a table with contrasting extension leaves would be requested by a customer, this may well be what you have
if this is the case the only way the change them would be the re veneer the leaves.
P.S. While you have it apart you may want to replace the felt runners.
-
20th December 2020, 07:39 PM #8
Ahh it’s a draw leaf table . Just noticed the last picture .
What I said before isn't right then . The end leaves of these live under the top and usually remain darker because of that . I thought it was a loose leaf where the ends open out and the gap left takes leaves stored somewhere else .
-
20th December 2020, 07:59 PM #9
Novice
- Join Date
- Dec 2020
- Location
- Australia
- Posts
- 11
I sanded the solid table legs today and they are a golden teak colour just like the table top. It just confirmed that I’d rather finish the table a golden teak colour.
So what’s involved with bleaching the extensions? Can a rank amateur do it?
many thanks
Von
-
20th December 2020, 08:01 PM #10
Novice
- Join Date
- Dec 2020
- Location
- Australia
- Posts
- 11
Golly, I hadn’t notices anything wrong with the runners. And there’s another thing to fix.
-
20th December 2020, 08:08 PM #11
Novice
- Join Date
- Dec 2020
- Location
- Australia
- Posts
- 11
-
20th December 2020, 08:49 PM #12
Novice
- Join Date
- Dec 2020
- Location
- Australia
- Posts
- 11
-
20th December 2020, 10:18 PM #13
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 355
Parker Furniture eh. So that would be veneered chipboard that people paid a fortune for?
Experienced in removing the tree from the furniture
-
20th December 2020, 11:47 PM #14
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
Yes usually a strip of thin felt under the main top on each side to stop the extension pieces rubbing timber to timber
-
20th December 2020, 11:48 PM #15
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
rod194 Correct now they sell for more than the did when new
Similar Threads
-
Parker Extension Dining Table
By Mandapi in forum RESTORATIONReplies: 5Last Post: 27th January 2015, 05:22 PM -
Parker dining table stripping and refinishing
By meggg in forum FINISHINGReplies: 8Last Post: 15th December 2014, 03:31 PM -
Professional help needed for Parker dining table
By evilwillow in forum FINISHINGReplies: 3Last Post: 19th March 2012, 08:57 PM