Thanks: 0
Likes: 15
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 20
-
5th August 2013, 09:33 PM #1
Dinki Di Round Hinge Ring box Competition
Round hinge ring competitionFirst of all I would like to thank and Admin , was good enough to put the Competition into the Forum as I did not have access to a computer while I was at the Sydney Wood Show.
Dinki Di’s Round Hinge Ring competition in the Australian Woodwork Forum , any one from any country is invited to have a go.
You can purchase the hinge rings from us at [email protected] , if you have any questions please contact me on the email address at the bottom of this page.
The round box competition starting on 24/7/ 2013, was created and supported by Dinki Di’s 76, 85 ,97 & 100 mm chrome or gold plated hinge rings.
1 (one) box only, per competitor. Any size ring or plating, is allowed.
Keeping things simple and easy in this friendly competition, the decision was made that, any materials between wood, acrylic or wood and resin combinations, as also any finish type, will be accepted...!
To make it fair to all participants, complete boxes photo’s are not allowed to be posted anywhere until after the closing date however, a little "tease" is allowed on the main competition thread so, be discreet, please.
At the competition closing time 24/ 10 / 2013, a new thread will be open for the participants to download a minimum of 4 Photo's of their box., Photo’s of the box open , closed, top and bottom from which the winner will be selected.
There will be 10 boxes selected by the judging panel and, if necessary some additional photo's may be requested to any of the participants, to help select the winning box.
The judging panel will be kept confidential I will have nothing to do with the judging this will be kept independent .
The winning box maker, will receive $200 worth of hinged rings of his or her choice, + a nice piece of Amboyna burl also known as PNG rose wood burl or a piece of nice Australian wood or burl approximate weight 4Kgspostage is free anywhere on the planet.
A case to say, the winner takes it all...!
Good luck.
The hinge ring sizes are;
Dinki Di 76 mm hinge ring $ 10+ postage Gold and silver plated
Dinki Di 85 mm hinge ring $ 12+ postage Gold
Dinki Di 97 & 100mm hinge ring $ 14 + postage Gold and silver plated.
Not in the competition are the square and rectangle hinges if anyone is interested
Dinki Di 100mm square $ 12 + Postage Gold silver & old bronze look plated
Dinki Di 125 x 80 rectangle $ 14-00 + Postage Gold silver and old bronze look plated
Distributors for the hinge rings.
Guy and Diane . [email protected] we do not have a web site yet . Good luck and have fun
P1 76mm butterfly. P2 76mm smooth. P3 85mm daisy. P4 97mm fan flower. P5 100mm Maple leaf. P6 & P7 box examples. P8 square hinge
.P9 rectangle hinge.
Last edited by DJ’s Timber; 5th August 2013 at 09:47 PM. Reason: Remove bold font, only to be used for highlighting, not the entire post.
-
24th October 2013, 08:00 PM #2
Hinge Ring Competition
The Hinged Ring Round Box Competition, in now CLOSED.
*- Please, forward your 4 (four) required submission entry pictures to [email protected]*- Each contestant's group of four pictures will be coded to avoid disclosure of the participant's identity.*- These coded pictures will be then forwarded to the judging panel.*- Once the judging panel have made its decision, the winner will be announced, in its Forum...!
Thank you to all who participated in the competition.
The organiser.
Dinki Di
A small box I knocked up. It's not in the competition.
-
1st November 2013, 06:53 PM #3
Compitition Winner
Thank you to everyone who participated in the Round Hinge Ring Competition.
I hope that this competition helps to inspire wood turners to create their own works and share there inspirations with fellow wood turners around the world.
The unanimous winning choice with the judges is Mr. Mervyn Larsson.
Congratulations Mervyn I’ll shall send you a private email to discuss your prize .
The organizer Gaetano (Guy) Moschella.
Mr. Mervyn Larsson
-
1st November 2013, 07:35 PM #4
Round hinge ring competition
Mr. David May
-
1st November 2013, 07:38 PM #5
Round hinge ring competition
Mr. Rod Gilbert
-
1st November 2013, 07:41 PM #6
Round hinge ring competition
Mr. John Meikle
-
1st November 2013, 07:43 PM #7
Round hinge ring competition
Mr. Michael Christophers
-
1st November 2013, 07:45 PM #8
Round hinge ring competition
Mr. Sam Shakouri
-
1st November 2013, 07:48 PM #9
Round hinge ring competition
Mr. Doug Midgley
-
1st November 2013, 07:51 PM #10
Round hinge ring competition
Mr. David Mitchel
-
1st November 2013, 07:53 PM #11
Round hinge ring competition
Mr. Jack Watt
-
1st November 2013, 08:12 PM #12
congrates to the winner & the other entrants
regards Michaelenjoy life we are only here a short time not a long time
-
2nd November 2013, 01:23 PM #13Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 74
- Posts
- 3,600
Well done to all entrants.
-
2nd November 2013, 10:37 PM #14
I also forgot to thank the organisers & judges
I won anyway this got me out on the tools after a six month absence
regards Michaelenjoy life we are only here a short time not a long time
-
3rd November 2013, 11:22 AM #15Novice
- Join Date
- Nov 2013
- Location
- Melbourne Vic
- Posts
- 7
Grw
I enjoyed taking part in the round hinge competition. Thank You to all the organisers. Gordon