Results 1 to 15 of 19
-
4th July 2005, 03:29 AM #1
Food-safe finish for jarrah chopping board?
Made swmbo a chopping board from some recycled jarrah, and I'm wondering what to finish it with. It will get heavy use in the kitchen and will get submerged regularly during washing in detergent & water.
The grain is quite open: is sanding sealer food-safe & waterproof?
I have done a search and come up with the following:
- Organoil: has a strong unpleasant smell that lasts a long time
- Olive oil: turns rancid
- no-name vegetable oil: might work because it contains a lot of preservative
- Shellawax/cream: can't be immersed in water
What are the chopping blocks sold in shops finished with?
There must be a simple solution...:confused:Last edited by zenwood; 4th July 2005 at 10:21 AM.
Those are my principles, and if you don't like them . . . well, I have others.
-
4th July 2005, 04:27 AM #2
"What are the chopping blocks sold in shops finished with?"
Nothing most are raw wood.....................................................................
-
4th July 2005, 08:58 AM #3
I have just finished chopping block also. Mine is just finished in tung oil. It seemed like a fair easy finish to reapply when it gets cut and scratched.
It hasn't been used yet, I'll be sure to update you if it kills anybody.
I believe the traditional finish for butcher blocks and the like is mineral oil.Specializing in O positive timber stains
-
4th July 2005, 09:09 AM #4
As many people have said in the past, and what I apply to the chopping boards that I make.
Nothing!
-
4th July 2005, 09:52 AM #5
Zenwood, All Organoil products are foodsafe, according to their literature. The smell does disappear after a while. There's also a couple of Orange-smelling food grade oils around too.
cheers
RufflyRustic
-
4th July 2005, 10:21 AM #6
Do A Search
This has been covered a dozen or more times - DO A SEARCH and use paraffin oil (mineral oil) or nothing if you know whats good for you.
-
4th July 2005, 10:25 AM #7Originally Posted by ubeautThose are my principles, and if you don't like them . . . well, I have others.
-
4th July 2005, 10:53 AM #8Senior Member
- Join Date
- Jun 2003
- Location
- Western Sydney
- Posts
- 149
Zen,
As you found out, nothing at all or mineral oil / paraffin.
One option is babyoil (mineral oil) then some more oil/candlewax.
Cheers,
Theva
-
4th July 2005, 12:11 PM #9
Zen
I go with the Organoil with the orange smell a burnishing variety and usually apply it with a cloth under the palm sander this heats the oil gives a better finish and the added bunus it cleans the grit paper on the palm sander as well
As you however only use the dark side rub it in well .
Have also found most women like the fresh smell of the orange from the oil
Rgds
Russell
The trouble with life is there's no background music.
-
4th July 2005, 04:19 PM #10
G'day Zenwood - Sorry, didn't read, just skimmed. Have a look at this http://www.woodworkforums.ubeaut.com.au/showthread.php?t=775 might help a bit.
You will also find that most of the cooking shows on the telly are going back to the raw timber chopping boards in favour of the plastic ones they were pushing a few years ago. I believe there has been a lot more tresting done on the remarkable properties of timber and there is more information available since that article of some 12 years ago.
Paraffin oil is the safest of all to use but as a rule it is only used for the initial oiling to make it look nice for selling.
There is a lot more info in the search pages but you need to know what to look for as the search isn't working as well as it should be at the moment. mostly the overwhelming answer is no finish.
Cheers - Neil
-
4th July 2005, 05:25 PM #11Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 4,816
Originally Posted by zenwood
Al
-
4th July 2005, 10:31 PM #12
What happened to wallnut oil, wasn't that the go a while back. :confused:
Any thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
4th July 2005, 10:40 PM #13
I use sunflower oil, it helps bring out the colour, not that it lasts long when put into use. Also keeps out water and protects the glue joints and once a month give it a wipe over with a little more oil.
If it goes against the grain, it's being rubbed the wrong way!
-
4th July 2005, 11:53 PM #14Senior Member
- Join Date
- Jun 2002
- Location
- Mildura Vic.
- Age
- 58
- Posts
- 12
Hi Zenwood, I have recently completed a laminated Jarrah chopping board also, I used an Organoil product designed for this use named "Food wipe".
I purchased it from a Woodshow from the Organoil stand & will be buying more this month. Pleasant citrus odour (not too strong) and brings out the natural beauty of the timber. (Why wouldn't you want to do this?)
Very happy with it. No side effects , ............. Yet...........!
Regards Sandman.
-
4th July 2005, 11:54 PM #15
I made the same thing two years ago, had lots of hard worrk, regular washing when the dishes are done. The only finish I used was good old olive oil, doesnt have any adverse health efects, darkes the colour of the jarrah buitifully and after a wash, just open the pantry pour on some more oil spread it around and let it dry.
It still looks beutifullI may not have gone where I intended to go, but I think I have ended up where I needed to be.
My Other Toys
Similar Threads
-
Baby safe finish for a cot.
By Vonrek in forum FINISHINGReplies: 9Last Post: 28th November 2007, 11:38 AM -
Food quality finish on bowls
By Woodchuck2 in forum FINISHINGReplies: 11Last Post: 10th May 2002, 07:19 PM
Bookmarks