Dusty mods

[fubar]

Picked up some 2ndhand pieces and and added them to my 2hp scheppach dusty.
cut the old chute off then marked it out on the new piece of jet, cut the tube off and fitted using combination of screws,rivets and silicone.
So now it's got a pleated filter and the jet vortex.

[BobL]

Picked up some 2ndhand pieces and and added them to my 2hp scheppach dusty.
cut the old chute off then marked it out on the new piece of jet, cut that out and fitted using combination of screws,rivets and silicone.
So now it's got a pleated filter and the jet vortex.

It's not clear to me if you removed the circular ducting from the Jet filter housing and cut a

If not it would be a significant turbulence generator and flow restrictor.

The real gain on such a system would be to open up the intake to take 6" ducting and then run 6" ducting.

[aldav]

What did you remove that ducting joint from the old DC with? Was it a plasma cutter, or a can opener?

[fubar]

Angle grinder and1mm disc eventually at first I tried to undo all the spot welds with cold chisel and hammer

[BobL]

It's not clear to me if you removed the circular ducting from the Jet filter housing and cut a . . . .

Thanks for adding the clarifying pic.

[aldav]

Yeah, I've tried the cold chisel and hammer method on spot welds too - never works does it!