![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
28th November 2009, 03:50 AM #1
Battening Out a floor HELP! half concrete half floor boards
HI there,
We are renevating our kitchen / dining area it is a small area around 13m2 and is total area is 2.5m x 4.6m.
The house is on bearers and joise and half the area is cypress flooring and the other is a small slab of concrete.
The plan was to batten the whole area out and lay new cypress flooring over the top of the whole area.
I just am not sure of the type of battens size, spacing hard wood or softwood etc etc.??
I was told to use a membrane on the concrete to prevent against mositure and then lay the battens out
any advice on the process of the battens sizing etc would be help fun.
Regards Thanks
Read the full thread at RenovateForum.com...
Similar Threads
-
Tiles OR floating floor boards OR laminate floating floor board
By Reno RSS Feed in forum FLOORINGReplies: 0Last Post: 19th August 2009, 02:00 PM -
Concrete slab, how smooth for floating floor boards?
By Dribbler in forum FLOORINGReplies: 2Last Post: 6th August 2006, 04:34 PM -
floor tiles on wood floor boards
By stevenroyals in forum TILINGReplies: 5Last Post: 30th May 2006, 06:05 PM -
Cutting Concrete Blocks in Half
By jlamplough in forum CONCRETINGReplies: 10Last Post: 22nd March 2005, 02:43 PM