![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
-
11th March 2013, 08:31 AM #1
New Member
- Join Date
- Feb 2013
- Location
- 4849
- Posts
- 4
How about a Tent for a Spray Booth ??
Does anyone have any thoughts or experience about using a new 3mx4m + tent for a sray booth .
There is no where around me that isn't dusty, previous attempts at sealing with either resin or varnishes etc have all ended with dusty speckly flecks.
For about $150 on ebay It seems from a neophytes perspective to be a cheap option.
I would appreciate hearing about your experience.
Thanks in anticipation
-
11th March 2013, 09:29 AM #2
-
11th March 2013, 05:28 PM #3
New Member
- Join Date
- Feb 2013
- Location
- 4849
- Posts
- 4
-
11th March 2013, 09:01 PM #4
GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 611
I think if you can seal it up effective enough to keep the dust out then you have no ventilation - which doesnt sound healthy. I also have no possibility of Building a dust free environment so I just switched to spraying lacquer. The problem with spraying varnishes etc is they take so long to dry that every bit of dust in the environment will find its way on there. Spray lacquers are different. They are pretty much dry as soon as they hit the surface, so even though I spray outside dust is seldom a problem.
Apologies for unnoticed autocomplete errors.
-
29th March 2013, 08:19 AM #5
GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 611
Found this while googling something else.
Paint Booth, Spray Enclosure, Contains Paint Odors, Overspray, ZipWallApologies for unnoticed autocomplete errors.
-
29th March 2013, 10:34 AM #6
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
These still need ventilation.
A tent may still be possible if a room air filter was located outside the tent with it's outlet fitted into the side of the tent so that the filtered air over pressured the tent, the tent door would need to be left partially open to allow for solvent extraction.
Since the tent is relatively small only a small filter would be required, something like this should do it.
Carba-Tec 650cfm Room Air Filter : CARBA-TEC
It would only need to be run while spraying takes place.
Some effort at ventilating the solvent away from the text would be needed (ie big axial fan) and the fitting of the filer would need to be on the wall opposite the doorway otherwise the filter unit will just suck solvent back into itself which would then enter the tent as well as possibly gumming up the internals of the room air filter.
-
29th March 2013, 12:36 PM #7
GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 611
Zipwall tents are commonly used by American painting contractors. They usually attach a blower like this Allegro Industries AC Blower With Canister — 15-Ft. Ducting, Model# 9533-15 | Ventilation Equipment| Northern Tool + Equipment . Not too sure about the configuration or whether it sucks or blows etc. You can buy blowers like this for as little as $100 at Harbour Freight.
cheers
ArronApologies for unnoticed autocomplete errors.
-
29th March 2013, 04:33 PM #8
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 1,174
We used those things when we painted labs with 2 pack epoxy They suck or blow simply according to how they are oriented. However they do not filter dust out of the air so if they are used as a blower it will push dust into a booth. If they are used in suck mode they suck dust into the booth. They also generate very little pressure so putting any sort of a filter in front of them will seriously stall the airflow
Similar Threads
-
Spray booth filters etc?
By DoctorWu in forum FINISHINGReplies: 0Last Post: 13th October 2010, 08:52 AM -
Anyone hiring a spray booth?
By Rod Martin in forum FINISHINGReplies: 1Last Post: 16th September 2010, 01:12 AM -
any ideas on building your own spray booth ?
By JDarvall in forum FINISHINGReplies: 11Last Post: 24th May 2008, 10:21 PM