Results 1 to 4 of 4
Thread: Flai rip blade
-
18th January 2015, 11:12 AM #1
GOLD MEMBER
- Join Date
- Oct 2007
- Location
- vic clayton
- Posts
- 0
Flai rip blade
I've just fitted a Flai rip blade to my Laguna TS so far I've put about 1/2 a km through with great results. The blade cuts with great ease with just the slightest cross hatching and the occasional deeper slice due to operator error.
the timber is a variety of Vic HW 21mm thickness.
will be interesting to see how long it will continue as I have an estimated 15km to go.
my usual rip blade is a Leuco on my 12" woodfast but the motor decided to stop and I need to get it fixedSome people are like slinkies - not really good for anything, but they
bring a smile to your face when pushed down the stairs .
-
20th January 2015, 10:24 PM #2
Senior Member
- Join Date
- Sep 2013
- Location
- Cherrybrook,NSW
- Posts
- 36
It looks like vic ash or tassi oak to me. How did you end up getting an estimated 15km of timber if I may ask. Is it recycled timber?
-
21st January 2015, 12:21 AM #3
GOLD MEMBER
- Join Date
- Oct 2007
- Location
- vic clayton
- Posts
- 0
It's approx 900 lineal metres per pack which I rip into strips usually 3 or 5 strips per length and I have a few packs to go through. The packs are mixed species of vic hardwood.
Some people are like slinkies - not really good for anything, but they
bring a smile to your face when pushed down the stairs .
-
21st January 2015, 03:35 PM #4
Im here now, Damn it!
- Join Date
- Jul 2003
- Location
- Near Bodgy, AlexS, Wongo & CraigB
- Age
- 19
- Posts
- 744
flai is a good brand, I have 2 for my 12" and they are really really effective. good choice.
Zed
Reply With Quote
Bookmarks