Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2005
    Location
    Newcastle/Tamworth
    Posts
    416

    Default Air Con Pipe Cover/Ducting

    Hey guys, looking for ducting to cover the refrigerant pipes connecting a split system. I've used the PVC type but locally it will cost me about $150 for two air cons.

    I'd like to use the colorbond or zincalume ones with clip on lids. Does anyone know who makes them? Near Tamworth would be good.

    Cheers
    Pulse

  2. #2
    Join Date
    Dec 2006
    Location
    Sydney
    Posts
    1

    Smile Air Con Pipe Ducts

    Am in the same boat. i need to find out where i can get them too as am fitting a system myself.

    Thanks in advance.

    D Toolman

  3. #3
    Join Date
    Jan 2005
    Location
    Newcastle/Tamworth
    Posts
    416

    Default

    G'day Joe, I ended up buying the plastic stuff from Heatcraft. It cost $80 for two air cons. The steel trunking was a bit cheaper but difficult to cut and sharp edges needed protection. In the heatcaft catalogue there was some cheaper ducting at $15 per length but he said they didn't stock it and the price was for tradies only.

    I got the INOAC clean duct 75mm. I'll try to post photos when done.

    Cheers Pulse

Similar Threads

  1. Small Split System Air Con - Advice Please
    By tcns in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 18
    Last Post: 11th January 2008, 12:46 AM
  2. Reducing cost of split system Air Con install
    By Wildman in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 25
    Last Post: 10th October 2006, 08:02 PM
  3. DIY ducted air con
    By jughead in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 8
    Last Post: 5th February 2004, 09:35 PM
  4. Replies: 1
    Last Post: 28th May 2003, 12:59 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •