Page 1 of 2 12 LastLast
Results 1 to 15 of 23
  1. #1
    Join Date
    Oct 2010
    Location
    Fig Tree Pocket - Brisbane Australia
    Age
    80
    Posts
    11

    Default Dining chairs need new rope weaving

    The 12 year old chairs were from Ikea and appealed to us a lot because of their looks and comfort. The stainless steel frame is covered with a weaving of paper based string which has torn in a few places. Rather than dumping the lot at the tip we would love to see them restored. I was thinking of using 5mm synthetic blind rope to reweave the frames and I’m looking for some help with this project (Brisbane, Australia).
    Can you help in any way? Can you think of someone who might be able to help? Can you think of a more suitable group or forum for this posting?
    Thank you for your time and thoughts.
    Chris

    Attached are a couple of photos
    Attached Images Attached Images

  2. #2
    themage21 is offline So that's how you change this field...
    Join Date
    Aug 2012
    Location
    Emu Plains, NSW
    Age
    40
    Posts
    38

    Default

    I'm no expert, but I'd suggest that using blind string may take away from the comfort because it will have different stretch/movement characteristics to the original string/paper system. Maybe consider using a material with stretch/elongation characteristics closer to that of the string?

    Ye olde rattan or cane would be a closer material if you were to go back into the traditional upholstery space - I believe Ikea probably use the string because it's recycled and has better enviro credentials than the harvest of canes.

    I know 3/5s of nothing about converting a chair from one substrate to another - you'll have to wait for the experts on that one.

    On the other hand, I applaud your attempt to resurrect furniture, to avoid waste - it's not always (rarely) economic (due to economies of scale with the original production), but the warm fuzzy feeling can help with that.

  3. #3
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    69
    Posts
    1,133

    Default

    Hi Chris

    welcome

    this site Seatweaving #101 -- Caning, Rush, Splint, Cord suggests
    Seats are woven with a variety of pliable materials such as strand cane, cane webbing, rattan reed, paper fibre rush, natural rush, ash, oak or hickory bark splint, Danish Modern cord, and Oriental seagrass to name a few.

    based on the photos on the referenced site, it looks like your chairs are woven with paper twist or paper rush, which the referenced site notes is more durable than natural rush.
    Restoring the chairs will be a good project for you and should require minimal tools. The site also links to US and Canadian suppliers of paper rush.
    regards from Alberta, Canada

    ian

  4. #4
    Join Date
    Oct 2010
    Location
    Fig Tree Pocket - Brisbane Australia
    Age
    80
    Posts
    11

    Default

    Thank you for your thoughts. The point you are making about different materials possibly stretching differently is rather important. I’ll will need to make some more testing, at this stage a 5 mm synthetic woven rope seems to stretch not too much to look saggy after stretching. Bur yes I’ll need to be careful about this detail. Thank you for your help,
    Chris

  5. #5
    Join Date
    Oct 2010
    Location
    Fig Tree Pocket - Brisbane Australia
    Age
    80
    Posts
    11

    Default thank you very much for the link

    Hi Ian,
    thank you very much for the link, it leads to a lot of very useful information.
    Since our chairs are not antiques but made out of stainless steel tubing I wouldn’t mind to try for long-levity (?) some suitable synthetic cord so I’ll need to research this area some more.
    Also I wonder how to find someone with a bit of spare time who would like to help with the weaving. I wouldn’t be able to afford expensive commercial hourly rates but perhaps some arrangements could be found.
    Again, thank you Ian
    Chris

  6. #6
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    69
    Posts
    1,133

    Default

    Chris

    Derek Cohen built an award winning copy of the "Wenger chair".
    On his website, and also in posts on this forum, he documented the building process, this link covers weaving the seat http://www.inthewoodshop.com/Furnitu...gTheChair.html
    Derek used Danish cord, which appears to be another name for paper twist or paper rush.

    When restoring the seats, I very strongly urge you to use the original material if at all possible. Synthetic cord will likely stretch excessively leading to sagging seats in a very short time. Given the stretch of synthetics -- up to 15% I believe -- pre-stretching the cord to remove future sag will possibly bend the chair frames.
    regards from Alberta, Canada

    ian

  7. #7
    themage21 is offline So that's how you change this field...
    Join Date
    Aug 2012
    Location
    Emu Plains, NSW
    Age
    40
    Posts
    38

    Default

    Ian makes a good point that I had neglected - the relative tensions required for different string/webbing materials would have influenced the design of the frame.

    Either way, it should be a good little project to try out - just don't forget to only unravel one chair at a time - so you have a pattern to copy from. You could take photos, but having an actual sample there would be a next level of helpful, particularly if you've never done it before.

  8. #8
    Join Date
    Oct 2010
    Location
    Fig Tree Pocket - Brisbane Australia
    Age
    80
    Posts
    11

    Default

    Hi Ian, thank you for “strongly urging” me to use the original material. Reflecting on what you are saying it makes sense that that synthetic cord could stretch and lead to disappointment. Actually it’s amazing that a humble product like paper cord seems to outperform synthetics.
    I started to undo some old cord on one chair and the actual frame is different to what I expected. The corners looked very difficult but in reality are just short pieces held in place by the main weaving. However I find it difficult to crack the system how the chairs were originally woven. Perhaps someone knows of a book with hints for these sort of techniques?
    Again, thanks for your thoughts and helpful links. By the way, Derek Cohen’s chair is amazing. Cheers Chris

  9. #9
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    69
    Posts
    1,133

    Default

    Chris, the link I posted above should have enough information to get you started.

    and I would be surprised if a library near you doesn't have more information on seat weaving. From what I know, the weaving patterns and steps are pretty standard, it's the materials used that make the difference.
    regards from Alberta, Canada

    ian

  10. #10
    Join Date
    Oct 2010
    Location
    Fig Tree Pocket - Brisbane Australia
    Age
    80
    Posts
    11

    Default

    Hi Ian, thank you for the encouragement. I’ll need to work through a couple of current priorities and in a few days get started with ordering material, your support was much appreciated. Your gentle help made the forum grow on me. There are plenty of other project on my mind but I shall also try to assist others as well. Kind regards

  11. #11
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    596

    Default

    Hi Chris, I'm not far from you (Chelmer) but a world away in help as I have never done anything like weaving (apart from splicing ropes for boats). However, there are a lot of craftspeople out there for whom weaving is second nature. Many {wow don't know the currently politically acceptable description anymore, "Australia's first people') have a wealth of weaving experience. There are also people on these forums whose female partners are weavers (yes, I know, sexist, but guess what, not, just recognising the facts) so, if you can search the forums for those hints you may find someone. BUT, try Queensland Spinners, Weavers and Fibre Artists | Fibrecraft House, 12 Payne St, Auchenflower Q 4064 P:07 33710009 Queensland Spinners, Weavers and Fibre Artists _ Fibrecraft House, 12 Payne St, Auchenflower Q 4064 P_07 33710009

  12. #12
    Join Date
    Oct 2010
    Location
    Fig Tree Pocket - Brisbane Australia
    Age
    80
    Posts
    11

    Default

    Hi Xanthorrhoeas
    Thank you so much for reaching out. Great ideas and detailed info I hadn’t thought of. Much appreciated. Have a great one!
    Chris

  13. #13
    Join Date
    Oct 2016
    Location
    Swansea, Tasmania
    Age
    67
    Posts
    6

    Default

    Hi Chris,
    If you can't find someone who could repair the weave why not consider covering the chairs? If you remove the woven part of the chair it would be easy to slip a cover of a material you like over them and reassemble them, you could also add cushion material in the seat area. If you make it removable they could be washed regularly.
    Rob

  14. #14
    Join Date
    May 2007
    Location
    Gold Coast
    Age
    71
    Posts
    456

    Default

    Chris, Chair weaving materials and repairs are available from andWovenCane in Bardon.
    Franklin

  15. #15
    Join Date
    Oct 2010
    Location
    Fig Tree Pocket - Brisbane Australia
    Age
    80
    Posts
    11

    Default

    Hi Rob,
    Thank you so much for your thoughts. I’m certainly impressed with the woodworks forum and its caring members.
    As it so happen some other priorities cropped up and the chair restauration subject has been shelved for the time being.
    Have a nice one, Chris

Similar Threads

  1. Old dining chairs
    By andrew29 in forum RESTORATION
    Replies: 9
    Last Post: 31st January 2017, 02:36 PM
  2. Oak dining chairs
    By Darryl in forum FINISHING
    Replies: 1
    Last Post: 27th March 2002, 09:13 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •