Page 1 of 6 123456 LastLast
Results 1 to 15 of 77
  1. #1
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    75
    Posts
    192

    Default Bessey KliKlamp CAUTION

    Bessey KliKlamps have become my clamps of choice for many reasons, ALMOST one-handed operation, good feel of the clamping pressure, quickly adjustable etc BUT for any woodworker who works in a high UV environment ie EVERYONE IN AUSTRALIA these clamps have a significant flaw. The red plastic 'triggers' are NOT UV stabilised and, after only a few years, they break and always in exactly the same place.

    klillamp01web.jpg


    A further problem is that they invariably break when you are trying to remove them from a job and hence both you and the job are stuck! I emailed them a few years ago to ask for spare triggers that I was happy to fit myself, but they advised that they DO NOT SELL SPARE PARTS.
    I have now lost 6 of my clamps (theres only 4 in the picture because today's and an earlier one were thrown out the shed window and I still can't find them!) and I think that is far too high a percentage of the 15 I have ... or had!
    in conclusion, very good clamp, very poor design flaw!
    fletty
    a rock is an obsolete tool ......... until you don’t have a hammer!

  2. #2
    I_wanna_Shed's Avatar
    I_wanna_Shed is offline Now I've got a 10x14m shed! I need a new name...
    Join Date
    Jan 2005
    Location
    Wollondilly, NSW
    Posts
    0

    Default

    Thanks for the heads up Fletty. I only have one of those clamps (works AWESOMELY with the Gifkins jig and the associated clamp holder), but have been planning to get more for the reasons you mention.

    Are yours stored in sunlight? How much UV have they had?

    Very poor form from Bessey not to supply spares.

    Nathan.

  3. #3
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    I use a few of these too - great for the Gifkins jig, and for holding work down to the bench when cutting dovetails manually.

    Just to be extra-safe, I think I'll keep them inside the glue fridge from now on

    There are a couple of cheaper copies of these clamps around now (e.g. Carbatec) - wonder if they suffer the same problem?

    Cheers

  4. #4
    Charleville's Avatar
    Charleville is offline Nocturnal and primeval - I fish at night.
    Join Date
    Nov 2007
    Location
    Brisbane
    Age
    73
    Posts
    0

    Default

    Quote Originally Posted by Mr Brush View Post
    Just to be extra-safe, I think I'll keep them inside the glue fridge from now on


    You drink glue?


    Do you drink it straight or have it as a shandy?

  5. #5
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    Quote Originally Posted by Charleville View Post
    You drink glue?


    Do you drink it straight or have it as a shandy?
    Not drink.
    Inhalant abuse - Wikipedia, the free encyclopedia
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  6. #6
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    I'll have you know.....I've laid up a delightful little 2012 Titebond III (dry, with a hint of tannins), and am saving the 2011 Techniglue for a really special occasion

  7. #7
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    75
    Posts
    192

    Default

    I use mine on the Gifkins jig as well AND when the trigger breaks they are VERY hard to get off because the nifty little clamp holder works so well!

    Quote Originally Posted by I_wanna_Shed View Post
    Are yours stored in sunlight? How much UV have they had?
    My shed is surrounded by trees and the clamps WERE stored on a rack near a north facing window. They would get no direct sun in the longer months and probably 2 to 3 hours per day in the shorter months. When I was preparing my case to Bessey, I put one of the broken trigger pieces out in the Sun, red side up, and the red area had reduced to grey/white in only 3 months.
    I now have them well inside the shed which is away from any direct light BUT out of MY reach as well.
    I do big glue ups outside and I am always conscious of getting the clamps off and back inside as soon as possible. A mate of mine is rebuilding a wooden boat (an excuse to spend hours afloat out of the house!) and he would have clamps out in daylight for weeks on end. He no-longer uses KliKlamps!

    fletty
    a rock is an obsolete tool ......... until you don’t have a hammer!

  8. #8
    Join Date
    Oct 2002
    Location
    NSW
    Posts
    0

    Default

    Sounds like you need to get an unbroken trigger to one of the CNC-heads on here, and they can start a nifty little aftermarket replacement part business, perhaps cutting replacement triggers out of metal?

    Cheers,
    Andrew

  9. #9
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    75
    Posts
    192

    Default

    Quote Originally Posted by arose62 View Post
    Sounds like you need to get an unbroken trigger to one of the CNC-heads on here, and they can start a nifty little aftermarket replacement part business, perhaps cutting replacement triggers out of metal?

    Cheers,
    Andrew
    FANTASTIC idea! I'll get one out and photograph it against graph paper to see if its feasible. It appears to have a long 'tail' to act as a spring which might be a problem though?
    It was suggested before that maybe I could make some from cast resin so I will look at that as well.

    gentlemen ... start your engines .... the market SO FAR is .... 6!

    fletty
    a rock is an obsolete tool ......... until you don’t have a hammer!

  10. #10
    Join Date
    Feb 2009
    Location
    moonbi nsw Aus
    Age
    70
    Posts
    228

    Default

    Hi Alan, Its a poor show on Bessy's behalf that they wouldn't help you out. Considering what the price here in Aus is to buy them. But then again they are German and wasn't one of them going to rule the world some time back?
    Surely there will be some talented Forumite who can come to the rescue.
    I wonder if they were worried you had a backyard business going in making replicas of the clamps.
    Its very annoying when you buy "quality" and then you run into no after sales back up

    My understanding of UV Rays is that you don't necessarily have to be exposed to the sun directly because its the light that carries the rays. So just exposing them to the natural light in the shed would be enough exposure to have a problem
    Just do it!

    Kind regards Rod

  11. #11
    Join Date
    Mar 2005
    Location
    Camden, NSW
    Age
    75
    Posts
    192

    Default

    Here is the villian of the piece photographed against 5mm graph paper. The cleverness of the design EXCLUDING THIS PIECE is that the components simply click together ... no fasteners at all!

    kliklamp02web.jpg

    The picture shows the impact of (presumably) UV light AND how predictable it is that there would be failures at the narrow neck. The design would allow that section to be thickened and with a greater radius to reduce the stress concentration. I think the spring 'tail' might make it difficult to machine from metal although aluminiun could be a possibility?

    fletty

    PS, these 2 pieces are from different clamps and therefore show how consistent, and therfore predictable, the failures are!
    Last edited by fletty; 17th March 2013 at 01:37 PM. Reason: PS added
    a rock is an obsolete tool ......... until you don’t have a hammer!

  12. #12
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Fletty, Ken whom you have met works for All Type Plastics Victoria Rd Smithfield off Smithfield Rd next door to Mitre 10. Tooling up costs heaps but the boss maybe able to do a small run if viable.

  13. #13
    Charleville's Avatar
    Charleville is offline Nocturnal and primeval - I fish at night.
    Join Date
    Nov 2007
    Location
    Brisbane
    Age
    73
    Posts
    0

    Default

    Quote Originally Posted by Cliff Rogers View Post


    Ah yes - I understand. I suppose that the fridge would keep it fresh.

  14. #14
    Join Date
    Apr 2012
    Location
    Sydney
    Posts
    38

  15. #15
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    Absolutely... When I go into our local hardware (Mum & Dad job) & the lady of the house is all rugged up with a beany on & I ask why she doesn't get some of the heaters out (they sell them too) as demo models she say she would but the cold weather helps the shelf life of the glue so the workers have to just live with it.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

Similar Threads

  1. Caution re Minwax WOP
    By Bob38S in forum FINISHING
    Replies: 4
    Last Post: 2nd August 2011, 03:39 PM
  2. Toilet Humour Within - Caution
    By Felder in forum JOKES
    Replies: 0
    Last Post: 28th July 2006, 04:33 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •