![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 13 of 13
Thread: Can't see attachments in threads
-
2nd July 2008, 11:17 AM #1
Can't see attachments in threads
G'day,
I know things are being uploaded to a new server, but for example in this thread http://www6.cyanide.com.au/~woodwork...ad.php?t=75015 WoodWould has some attached pics in the third post, I can't see them and the same goes for many other threads while others can.
Is something on the fritz or am I on the fritz?
If it's here, then that's good, because I have more time before I get committed for losing my marbles.
-
2nd July 2008, 11:25 AM #2
Are you logged in on that thread? If you're not logged in, you won't see the attachments.
Cheers
DJ
ADMIN
-
2nd July 2008, 11:30 AM #3
Ok, it looks like WW has attached a blank pic as I cannot see anything either now that I have logged in on that thread.
Correction, cannot view the pic in Opera for some reason but works in Firefox & I.ECheers
DJ
ADMIN
-
2nd July 2008, 11:32 AM #4
I'm logged in and I can't see the pictures either.
However Waldo was also complaining about not seeing the pics in this thread, and I have no difficulty seeing them.
We seem to have started a new "other web address" episode like we had a while ago.
-
2nd July 2008, 11:35 AM #5
SENIOR MEMBER
- Join Date
- Sep 2007
- Location
- Melbourne
- Posts
- 0
Hi DJ,
I am logged on and can't see that attachment either. I have also noticed that most times when changing threads I have to log on again to the new thread to see the images...wasn't like that before.It gets a bit annoying after awhile having to re-log on all the time!
regards
Chipman
Using IE 7
-
2nd July 2008, 11:40 AM #6
-
2nd July 2008, 11:41 AM #7
Ok, I have reported this to Admin as my privileges do not extend that high
Cheers
DJ
ADMIN
-
2nd July 2008, 11:49 AM #8
Thanks for reporting it Dj. I'm always logged in and I'm using Safari 3.0.3 if that's any help for the IT bloke.
-
2nd July 2008, 11:20 PM #9
In that earlier episode, IIRC, part of the problem was shared domains. If you tick "Remember Me" in the login box, the shared domains should be accessible. Although there might have been some other hiccups operating for a while.
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
2nd July 2008, 11:24 PM #10
SENIOR MEMBER
- Join Date
- Sep 2007
- Location
- Melbourne
- Posts
- 0
If you tick "Remember Me" in the login box, the shared domains should be accessible.....
Joe[/quote]
Done that but still did not work...perhaps it is a bit like me....Forgetful!!!!
Chipman
-
3rd July 2008, 12:35 AM #11
I can see them all. However the problem may be with the pic database. Steve has been moving the many, many gb of photos from the database on to their own server and there might be a hickup or two for a little while.
Also make sure you're logged onto www.woodworkforums.com and not the woodworkforums.ubeaut.com.au site or the woodworkforums.com.au site and see if there is a difference.
It might also be necessary to bard refresh the page Ctrl + refresh. If these don't work handg on for a while I'm sure all will be right again sooner or later.
Cheers - NeilKEEP A LID ON THE GARBAGE...Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Reporticon at the bottom of all Posts, PM's and Blog entries.
-
3rd July 2008, 12:46 AM #12
-
3rd July 2008, 08:51 AM #13
Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 74
- Posts
- 2,515
Similar Threads
-
Attachments
By pfisher in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 1Last Post: 20th January 2007, 05:58 PM -
Can't include attachments
By AlexS in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 14Last Post: 28th October 2006, 06:54 PM -
Loading Attachments
By BobL in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 0Last Post: 19th June 2006, 11:37 PM