![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
-
15th January 2012, 03:44 PM #1
Hammer Head
- Join Date
- Jan 2005
- Location
- Sydney
- Posts
- 191
clear to sprayed white finish hints needed
got this old set of draws that is clear finish that i want to spray white.
this is what i am thinking
orbital sand with 180G
hand sand edges with 180G
tack rag
spray 1 coat zineg primer 1-2-3
rub back 320G
spray white 2 coats,
not sure what type of white to use, if to just thin down some enmel or use something else, we do have some single pack white wattly left over but not sure.
-
16th January 2012, 12:41 AM #2
You might just check to see if you need to de-nib the first coat of white paint before you apply the second.
Otherwise I can't see anything wrong with that plan.Dragonfly
No-one suspects the dragonfly!
-
16th January 2012, 11:05 AM #3
SENIOR MEMBER
- Join Date
- Dec 2010
- Location
- Melbourne
- Age
- 80
- Posts
- 36
Nrb
You could fine sand any damaged bits them wipe over with a product called ESP this prepares the surface for paint,spray or brush,I have used a small roller for the flat surfaces brush the rest,came out great.
Have a look in bunnies and read the instructions,beats sanding it all down.
Similar Threads
-
2pack high gloss clear furniture finish needed
By woodchisel in forum FINISHINGReplies: 1Last Post: 19th August 2007, 08:55 PM -
recycling decking hints needed!
By would not in forum DECKINGReplies: 2Last Post: 16th June 2007, 12:49 AM