![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
7th May 2023, 01:22 PM #1
How to refinish this wood and aluminum...
My back door step could use some sprucing up but I'm not sure how to go about it. I would imagine the wood pictured is treated and the metal is aluminum. How would I go about resurfacing or finishing both these surfaces to get them to look some better?
The painted white part on the left is actually a different surface a couple inches below the unpainted wood step.
Thanks
step.jpg
-
7th May 2023, 03:08 PM #2
Can you disassemble / remove it. Would be a lot easier to re-condition if you could have all the individual "parts" accessible in your workshop.
Similar Threads
-
how to refinish mdf that has been lacquered?
By vouvoune in forum FINISHINGReplies: 3Last Post: 4th February 2009, 07:40 PM -
how to best refinish red cedar?
By gnu52 in forum FINISHINGReplies: 2Last Post: 23rd March 2006, 01:42 PM