![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 11 of 11
Thread: Stripping wood stain varnish
-
26th July 2023, 10:18 PM #1
Novice
- Join Date
- Jan 2018
- Location
- Aldinga Beach
- Age
- 77
- Posts
- 5
Stripping wood stain varnish
Today I've watched a number of YouTube videos on how to strip furniture (chairs in my case). As they all American videos, they use (unavailable here) American products including oven cleaner. Today I bought a Bondall product from Bunnings and ended up with a sticky mess. Can anybody recommend an Aussie video and Aussie products to easily strip wood back to its near normal wood fresh state please?
-
28th July 2023, 12:24 PM #2
Novice
- Join Date
- Mar 2015
- Location
- Wollongong
- Posts
- 2
Soda blaster?
It makes a bit of a mess though.
-
28th July 2023, 12:50 PM #3
GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 287
If it was the water-based "safe" paint stripper, they are useless. Unfortunately you have to go nuclear and use the old-school stuff:
Just a moment...
It also leaves a sticky mess, but it works. I wipe off the gunk with rags soaked in copious amount of metho. Wear gloves! Not the thin blue disposable ones- the vapours go right through those and burn your skin.
-
29th July 2023, 11:21 AM #4
Novice
- Join Date
- Jan 2018
- Location
- Aldinga Beach
- Age
- 77
- Posts
- 5
-
29th July 2023, 10:55 PM #5
Do you have any idea of the age of the chairs, whether their finish is original and any guess as to just what the finish is?
Or have the chairs been repainted at some time and you wish to remove the paint?
If you go back far enough, to the days when shellac was king, all you really need is metho and a lot of patience.
Modern finishes are often PolyUrethane (or similar) based and tend to require more... chemical solutions.
In the time-span between, oiled finishes were quite popular on quality furniture and they sort of fall in-between the above two when it comes to removal. Metho works, but tends to be very time consuming. Strippers work but tend to be rather nasty to use. Neither approach will "fully" remove all the finish as oils penetrate into the surface and aren't easily removed without heavy sanding, etc.
Personally I dislike using strippers and prefer hand scraping but that's labour intensive and, while with practise can be as fast as using strippers, I doubt it meets your requirement of "easily."
Although I'd also argue that strippers won't & don't meet your desire for bringing wood back to "it's near normal wood fresh state" unless you count sanding (or hand scraping!) afterwards as part of the process anyway.
- Andy Mc
-
31st July 2023, 11:49 AM #6
Novice
- Join Date
- Jan 2018
- Location
- Aldinga Beach
- Age
- 77
- Posts
- 5
-
4th August 2023, 11:20 PM #7
Novice
- Join Date
- Jul 2008
- Location
- Banyo Qld
- Age
- 78
- Posts
- 15
Sorry if this is a bit late, but it might be of help for future restoration and finishing work if needed.
The Aussie finishing bible "A Polishers Handbook" will give you a heap of information about stripping, etc. and it's all also good old Australian info.
I've had 3 of the 5 updated ones and it's a little ripper. The first one was after completing a weekend workshop in 1989 the last was early this year with the new binding.
The book covers everything from stripping to full blown finishes. Written by the Benevolent Dictator. Use it regularly, worth every penny and highly recommended.
DarkyEvil to the bone.But really cute.
-
5th August 2023, 02:35 AM #8
GOLD MEMBER
- Join Date
- Mar 2010
- Location
- US
- Posts
- 93
if you have a garage, do the work at the garage door with a fan fairly far into the garage to give a gentle breeze out.
The environmentally friendly stuff can do a good job only if it's lucky enough to be matched to destroying some bonds in finishes. I haven't had any luck with any of it, either. The stuff sold as "stripper" here that says it will strip varnish is usually pretty good (I'm in the states) and it won't burn your skin immediately or anything, but if you leave it on, you'll feel it start to get warm on a spot and it's obviously a good idea not to leave it on skin.
Unfortunately, the containers now aren't that easy to tell apart and I'm making varnish as a hobby, including japanning. The "not environmentally friendly labeled" but still reformulated advertises that it strips paints and stains, but the word Varnish isn't on the label. It does nothing to varnish or japanning (which is essentially a varnish with a resin that comes from the ground instead of trees or synthetics replacing tree bits).
-
5th August 2023, 10:00 AM #9
GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 287
When buying paint stripper I ignore any marketing blurb on the label and just look for methylene chloride (dichloromethane) as the active ingredient.
-
5th August 2023, 10:13 AM #10
I use this stuff. It works well and comes in smaller sizes than 20 liter.
Anchor One Shot Paint Stripper 20L
-
7th August 2023, 06:21 PM #11
I'll 2nd what Auscab said above.
For what it's worth... I used to purchased the cheapest nastiest stripper and brushed it on then cover it with cling wrap which excluded the air from it and made it work more efficiently on almost everything except for *&&#@ water based poly and 2 part epoxy.
Cheers - NeilKEEP A LID ON THE GARBAGE...Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Reporticon at the bottom of all Posts, PM's and Blog entries.
Similar Threads
-
Stripping back dark stain on oak stools
By KRF in forum RESTORATIONReplies: 6Last Post: 6th May 2020, 10:11 PM -
Solid beech baby cot stain - all-in-one stain & varnish?
By Dazza_M in forum FINISHINGReplies: 6Last Post: 13th March 2017, 02:32 PM -
Stain and oil or stain and varnish on a kitchen bench
By ghowe in forum FINISHINGReplies: 8Last Post: 26th October 2012, 01:53 PM -
Stain or Varnish
By thebullfrog07 in forum FINISHINGReplies: 4Last Post: 12th October 2009, 09:08 PM -
stripping dining setting and varnish
By Goldy in forum FINISHINGReplies: 2Last Post: 10th August 2003, 11:18 PM