Results 1 to 13 of 13
  1. #1
    Join Date
    Apr 2022
    Location
    Melbourne, Australia
    Age
    48
    Posts
    15

    Default Luke warm water in bathrooms, scalding in kitchen

    Hi all - looking for some troubleshooting tips before I bite the bullet and call out a plumber. Our hot water system is about 10yrs old; in recent months we’ve noticed a drop in temperature in both bathrooms while the kitchen and laundry remain fine. It used to be that we’d have near scalding temperatures out of all outlets across the house - the kitchen annd laundry are physically closer to the HWS with exception of one of the bathrooms, which also has had a drop in temperature. It’s a gas-heated unit with an electric booster.

    Ideas on what could be causing the disparity or that I - with zero plumbing experience aside from replacing washers - could check?
    It's pronounced why-kick-a-moo-cow.

  2. #2
    Join Date
    May 2023
    Location
    Maroochydore
    Age
    76
    Posts
    139

    Default

    Quote Originally Posted by Waikikamukau View Post
    Hi all - looking for some troubleshooting tips before I bite the bullet and call out a plumber. Our hot water system is about 10yrs old; in recent months we’ve noticed a drop in temperature in both bathrooms while the kitchen and laundry remain fine. It used to be that we’d have near scalding temperatures out of all outlets across the house - the kitchen annd laundry are physically closer to the HWS with exception of one of the bathrooms, which also has had a drop in temperature. It’s a gas-heated unit with an electric booster.

    Ideas on what could be causing the disparity or that I - with zero plumbing experience aside from replacing washers - could check?
    Without a pic of the water heater and associated valves I can only assume you have untempered hot water feeding kitchen and laundry, with tempered water feeding bathrooms, and the tempering valve needs attention/replacement.

  3. #3
    Join Date
    Sep 2005
    Location
    Bendigo
    Age
    60
    Posts
    229

    Default

    Quote Originally Posted by rambunctious View Post
    Without a pic of the water heater and associated valves I can only assume you have untempered hot water feeding kitchen and laundry, with tempered water feeding bathrooms, and the tempering valve needs attention/replacement.

    Pictures will help, suspect there is a tempering valve that is playing up.

  4. #4
    Join Date
    Apr 2022
    Location
    Melbourne, Australia
    Age
    48
    Posts
    15

    Default

    I'm assuming this shows the tempering valve and that the bottom two are tempered and supply each of the bathrooms while the top is untempered and supplies the laundry and kitchen?

    IMG_8454.jpg

    IMG_8455.jpg IMG_8456.jpg
    It's pronounced why-kick-a-moo-cow.

  5. #5
    Join Date
    Jun 2010
    Location
    SW Victoria
    Posts
    106

    Default

    I did this recently... In the first picture, the device down low with the yellow cap is the tempering valve, and I'm assuming it has a triangle 'tool' moulded into the top of the yellow cap. Pry off the yellow cap, turn it over and use it to turn the value anti-clockwise to set it hotter. It could be stiff, so give it a good old go, turn it clockwise to test it turns at all, but if it can't be turned anti-clockwise it's max'ed out and it could be faulty

  6. #6
    Join Date
    May 2023
    Location
    Maroochydore
    Age
    76
    Posts
    139

    Default

    For you and your family's safety you need to have a good read of all of this link before you take advice/information on a forum about adjusting the tempering valve.

    While it is from a Queensland Company it applies Australia wide.

    https://www.indeepplumbing.com.au/ho...mpering-valve/

    My advice, send the pics to Plumbers and ask for quotes to replace the valve.

  7. #7
    Join Date
    Apr 2022
    Location
    Melbourne, Australia
    Age
    48
    Posts
    15

    Default

    Quote Originally Posted by rambunctious View Post
    For you and your family's safety you need to have a good read of all of this link before you take advice/information on a forum about adjusting the tempering valve.

    ...

    My advice, send the pics to Plumbers and ask for quotes to replace the valve.
    Yeah, based on replies so far it seems clear to me that I'll need to get the valve replaced/looked at; no-one's touched it so recent fluctuations in temperature suggests a replacement is needed.

    Thanks everyone
    It's pronounced why-kick-a-moo-cow.

  8. #8
    Join Date
    Apr 2019
    Location
    NSW
    Age
    38
    Posts
    311

    Default

    with out hijacking the thread, how does that hot water system work?


    so the gas is used for the storage unit... but all the water flows through the elect but it only kicks in if you switch it on?

  9. #9
    Join Date
    Sep 2005
    Location
    Bendigo
    Age
    60
    Posts
    229

    Default

    Quote Originally Posted by havabeer69 View Post
    with out hijacking the thread, how does that hot water system work?


    so the gas is used for the storage unit... but all the water flows through the elect but it only kicks in if you switch it on?
    Wait for the OP but looks like solar with gas boost. But solar disconnected?

  10. #10
    Join Date
    Apr 2022
    Location
    Melbourne, Australia
    Age
    48
    Posts
    15

    Default

    Quote Originally Posted by droog View Post
    Wait for the OP but looks like solar with gas boost. But solar disconnected?
    Yes - keen eyes! We had the solar disconnected about a year ago. Was causing more problems than it was worth and given the age of the unit seemed to make more sense to eventually replace the whole setup rather than try and rectify the issues we had (which was primarily a noise / pump issue).
    It's pronounced why-kick-a-moo-cow.

  11. #11
    Join Date
    Nov 2007
    Location
    Canberra Australia
    Posts
    74

    Default

    Quote Originally Posted by Waikikamukau View Post
    Yes - keen eyes! We had the solar disconnected about a year ago. Was causing more problems than it was worth and given the age of the unit seemed to make more sense to eventually replace the whole setup rather than try and rectify the issues we had (which was primarily a noise / pump issue).
    It may be easier and more reliable to just use solar power to run a heat pump water heater, if you have solar power already.

  12. #12
    Join Date
    Apr 2022
    Location
    Melbourne, Australia
    Age
    48
    Posts
    15

    Default

    Plumber diagnosed the tempering valve as being the issue. At a parts cost of $900+, we decided that - given the age of the existing unit and its inefficiencies - to replace the entire system.

    Three days in and we couldn't be happier. Hopefully will see some reduction in gas consumption, too.

    Thanks everyone for your input.

    IMG_8477.jpg
    It's pronounced why-kick-a-moo-cow.

  13. #13
    Join Date
    May 2023
    Location
    Maroochydore
    Age
    76
    Posts
    139

    Default

    Quote Originally Posted by Waikikamukau View Post
    Plumber diagnosed the tempering valve as being the issue. At a parts cost of $900+, we decided that - given the age of the existing unit and its inefficiencies - to replace the entire system.

    Three days in and we couldn't be happier. Hopefully will see some reduction in gas consumption, too.

    Thanks everyone for your input.

    IMG_8477.jpg
    Assuming the new unit was $900+ (and not the tempering valve) it is a good choice.

Similar Threads

  1. Wax and water problems kitchen bench
    By Kwozzys in forum FINISHING
    Replies: 1
    Last Post: 17th July 2012, 04:36 PM
  2. kitchen cupboard gas water heater
    By ubeaut in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 16th November 2008, 07:10 AM
  3. kitchen cupboard gas water heater
    By ubeaut in forum HEATING & COOLING
    Replies: 0
    Last Post: 16th November 2008, 07:10 AM
  4. low water pressure only in kitchen
    By ubeaut in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 16th November 2008, 07:10 AM
  5. kitchen water proofing
    By glaird in forum KITCHENS
    Replies: 3
    Last Post: 3rd September 2004, 09:48 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •