![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
-
22nd December 2013, 08:23 PM #1
Senior Member
- Join Date
- May 2012
- Location
- Melbourne, Australia
- Posts
- 31
Anybody chucking out an Epson inkjet printer
I made a previous post looking specifically for Epson R200/300 printers, but I've just found my software works with my Epson TX810FW. The software does not actually support this printer so I'm lucky it worked.
So now I'm guessing some other Epson (only Epsons) printers might work too, so if anyone is chucking one out, I might come and collect it and see if it works with my software. If it doesn't then I've inherited the task of disposing of it.
This is for my new PCB making adventures, and I'm going through old inkjets like crazy, but I'll get there.
I'm a few Ks from Frankston on the Mornington Peninsular, VIC.
Cheers,
Keith.
-
22nd December 2013, 10:22 PM #2
GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 408
I have an Epson Stylus Photo R210 in perfect condition that you could have. Not sure where the software disk is though.
I am out and about a fair bit, where are you located?
-
23rd December 2013, 07:10 AM #3
Senior Member
- Join Date
- May 2012
- Location
- Melbourne, Australia
- Posts
- 31
Hi Cava,
That is actually one of the supported models so I'm itching to get my hands on it. Thank you.
I see you are on the Mornington Peninsular too.
I'm close to Frankston. For a working printer a little drive won't hurt. I've already blew well over $200 (including fuel) on used inkjets that I could not resurrect. That's why now I'm just looking for printers that people are tossing.
I'll be able to get the driver from Epson so that won't be a problem.
I'll PM you,
Cheers,
Keith.
-
24th December 2013, 07:38 AM #4
Senior Member
- Join Date
- May 2012
- Location
- Melbourne, Australia
- Posts
- 31
Cava,
sent you a PM yesterday morning. Let me know here if you don't receive it.
Cheers,
Keith.
Similar Threads
-
Any ideas where to look for old Epson Stylus R200 & R300 series printers
By beefy in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 5Last Post: 22nd December 2013, 08:09 PM -
Decoupage with inkjet images
By echnidna in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 9Last Post: 24th November 2004, 07:15 PM