Results 1 to 7 of 7
  1. #1
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default How to modify this garage

    Hi. This old garage is at the rear of our house. I want to retain it but update the front.

    The walls are besser block.

    My current idea is to cut down where I have drawn the red line and remove the blocks on the right hand side of the line. Then fit a sectional garage door across the space that will then be about 3500 wide. The top of the door will be about half way up the current windows. Then reconstruct all the frontage that is above that point - a bit more modern in style.

    I’m assuming I can just hire a concrete saw and cut directly through the blocks. Then knock them out - they appear to just sit on the old slab. Then tidy it up with render.

    Is this possible, or am I missing something?
    Is there an easier way then using a saw?

    Cheers
    Arron

    C82D6F34-C659-4FDC-94C8-284475F0AAB0.jpg
    Apologies for unnoticed autocomplete errors.

  2. #2
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    75
    Posts
    832

    Default

    Exactly as you have said
    The person who never made a mistake never made anything

    Cheers
    Ray

  3. #3
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default

    Thanks. I have a 9 inch angle grinder. Do you think I could use that with a diamond blade? Save myself a trip to the hire shop.

    Also, would there be any reo in the bit I’m removing and will that interfere with the cutting?

    Cheers
    Apologies for unnoticed autocomplete errors.

  4. #4
    Join Date
    Feb 2018
    Location
    Shepparton
    Posts
    3

    Default

    a nine inch grinder with appropriate breathing gear would do the cut however being close to the corner may have reinforcing steel in corner diamond blade will take a moderate amount of steel cutting.[and i mean moderate]

  5. #5
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    558

    Default

    What width are the blocks and are the cores filled? A diamond blade in a grinder will cut the blocks like butter but if you cant cut right through after cutting from bith sides it can sometimes get a bit messy getting a clean face to work with for the next stage or you can risk damaging the blocks you are wanting to keep in the process which can make a bigger job of it all.

  6. #6
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default

    Quote Originally Posted by Beardy View Post
    What width are the blocks and are the cores filled? A diamond blade in a grinder will cut the blocks like butter but if you cant cut right through after cutting from bith sides it can sometimes get a bit messy getting a clean face to work with for the next stage or you can risk damaging the blocks you are wanting to keep in the process which can make a bigger job of it all.
    They are just standard besser blocks so 190mm wide I guess. That means I won’t get all the way through with a 9inch. I don’t mind a bit of demolition damage though because I will be rendering it anyway.

    For 50% of the blocks the join is directly under where I want to cut. I don’t know how cleanly they will part at the joint.

    As for the cores, I’ll have a look tomorrow (no power out there) and I should be able to poke a rod down and find out what is filled and what isn’t.
    Apologies for unnoticed autocomplete errors.

  7. #7
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    558

    Default

    Quote Originally Posted by Arron View Post
    They are just standard besser blocks so 190mm wide I guess. That means I won’t get all the way through with a 9inch. I don’t mind a bit of demolition damage though because I will be rendering it anyway.

    For 50% of the blocks the join is directly under where I want to cut. I don’t know how cleanly they will part at the joint.

    As for the cores, I’ll have a look tomorrow (no power out there) and I should be able to poke a rod down and find out what is filled and what isn’t.
    190mm is a standard size and are most likely not core filled in that situation The concrete saw is the tool of choice if you had one but the grinder will do it as well all be it with dust and not a single pass clean cut.

Similar Threads

  1. How can I modify Sash window frames??
    By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 4th April 2012, 03:10 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •