Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2013
    Location
    melb
    Posts
    136

    Default Cut & polishing near edges with sides?

    If I was to buff a shelf that had side walls, how do I get near the edge? Do I have to rub that area by hand? The tool looks like a buffer attached to a drill. Curious how others do it Thanks.

  2. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Do by hand.

    OR

    Protect other surfaces with sheets of thin (but not too thin) steel or similar. Be wary of catching edges with the buff, always make sure the buff direction is going off the steel, and be cautious about picking up smutting from the steel.

    OR (best method)

    Test assemble.

    Disassemble.

    Mask glue areas.

    Finish.

    Unmask glue areas.

    Reassemble.

  3. #3
    Join Date
    Aug 2013
    Location
    melb
    Posts
    136

    Default

    Quote Originally Posted by Master Splinter View Post
    Do by hand.

    OR

    Protect other surfaces with sheets of thin (but not too thin) steel or similar. Be wary of catching edges with the buff, always make sure the buff direction is going off the steel, and be cautious about picking up smutting from the steel.

    OR (best method)

    Test assemble.

    Disassemble.

    Mask glue areas.


    Finish.

    Unmask glue areas.

    Reassemble.
    Thanks, appreciate it.

Similar Threads

  1. Two Sides
    By Rodgera in forum JOKES
    Replies: 5
    Last Post: 29th July 2014, 09:11 PM
  2. ute sides
    By Tonyz in forum FINISHING
    Replies: 8
    Last Post: 27th August 2006, 10:42 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •