Results 1 to 15 of 18
-
1st April 2024, 05:55 PM #1Senior Member
- Join Date
- Mar 2008
- Location
- Cairns
- Posts
- 229
gazebo or something in front of shipping container?? whats good?
have shipping container i want to put a 6m long x 3m wide cover over temporarily when i need to work in front of it once in a while, can anyone recommend a DIY made thing like this or a retail item for this that will work ok to keep the shade off and have 3 sides to it??? 2 long sides and one short? to stop people seeing in there as well so its a bit private, so not shade cloth sides.
-
2nd April 2024, 07:15 AM #2Senior Member
- Join Date
- May 2023
- Location
- Maroochydore
- Age
- 76
- Posts
- 139
Temporary ??? usually becomes permanent.
In Cairns it will either have to be roll out awning secured to the container then hang temp sides from it when needed,or
steel framed roof with roofing screwed and walls to suit (not really temporary)
insulated patio cover with walls (again not temporary)
frame with tarp attached (blow away in first breeze)
Of course everything is governed by amount of funds available and what neighbours consider appropriate to look at.
-
2nd April 2024, 10:50 AM #3Senior Member
- Join Date
- Mar 2008
- Location
- Cairns
- Posts
- 229
-
2nd April 2024, 11:21 AM #4
Not a cheap solution but I would be looking at caravan annex type solutions or perhaps a cheaper option such as the 4WD awnings - say 2 x 3m with detachable sides / awning extensions wit poles & guy ropes..
One method I have seen is to attach an aluminium "sail track" profile to the side of the container then use the 4WD awning extensions with a sail track style edge;
or go the el-cheapo "blue tarp" approach with a few saddles attached to the container to match the tarp's eyelets, poles & guy ropes. However IF you are doing "hot work" - welding, oxy etc, then be very mindful of the potential fire hazard.
There are heaps of options with home improvement roll out blind type setups but again not cheap.
ps another option a much simplified setup similar to the "fold out" style container granny flats coming out of Chinwa!Mobyturns
In An Instant Your Life CanChange Forever
-
2nd April 2024, 01:41 PM #5
-
2nd April 2024, 03:13 PM #6Senior Member
- Join Date
- Mar 2008
- Location
- Cairns
- Posts
- 229
something like this and put a tarp or something over the top and sides.
maybe get a 6m length of steel and attach to container and make a stand the other end or something?
-
2nd April 2024, 03:14 PM #7Senior Member
- Join Date
- Mar 2008
- Location
- Cairns
- Posts
- 229
-
2nd April 2024, 06:31 PM #8
If you welded two tabs for each steel section onto the roof you could cantilever the steel off the roof and drape a tarp over it. No need for uprights and they would slide back on top of the roof to stow out of the way.
IMG_0615.jpg
-
2nd April 2024, 06:50 PM #9
20240402_135901.jpg
I was thinking of saying your folks didn't make you join the scouts did they .
But then I saw this and the picture.
Is that your set up and its sitting on bitumen?
In which case you cant make poles and use guy ropes and pegs.
Next option if you cant use guy ropes and pegs in the ground is make poles and horizontals that bolt together that can have a tarp tied to the top and sides.
If you cant weld or do good ropework instead your stuck like a girl and have to pay some other way imho.
-
2nd April 2024, 07:52 PM #10
Yeah, bitumen limits your options somewhat.
Being in a publicly accessible area, a car park, I guess you will also have to consider the "what if's" - what if a gust of wind lifts the temporary shade shelter???
Seeing some of the ludicrous and unreasonable exclusions that have come to light in the past few years the public liability insurer for the complex may also have issues with fixed or temporary "structures" in the car park. Good luck!
Just have a look at the site conditions for market stall gazebos these days with hold down requirements etc. Perhaps a simple free standing gazebo may be your best option. Secured to the container/s on one side with weights on the opposing side.Mobyturns
In An Instant Your Life CanChange Forever
-
3rd April 2024, 07:03 AM #11
I think Wozzzzza should consider one of the ready made concertina style marquees particularly as he anticipates pulling it down at the end of the day. The one I am linking below is reasonably made and a little more robust than the 3m x 3m versions. I have one of these from this seller, but mine does not have sides.
Instahut Gazebo Pop Up Marquee 3x3 3x4.5 3x6 Outdoor Folding Wedding Tent Canopy | eBay
It can be erected by one person, but two people make the task easy. It ticks the boxes for some privacy and collapsability (is that a word?) and I would suggest the difference in cost compared to improvising would be small.
I note it comes with both guy ropes and sand bags, although the bags may not be large enough. I expect the corners of the marquee could be fixed to the top of the container corner posts. For $300 it is just about ready to go. Comes in a choice of colours.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
3rd April 2024, 09:24 AM #12
Something along the lines of what Mic-d said but use castor wheels and some small wheels at the bottom and then clad it with colorbond as it’ll then cover the roof and side of the container and blend in when it is retracted
IMG_0508.pngCheers
DJ
ADMIN
-
3rd April 2024, 09:18 PM #13Senior Member
- Join Date
- Mar 2008
- Location
- Cairns
- Posts
- 229
-
6th April 2024, 09:20 PM #14Senior Member
- Join Date
- Mar 2008
- Location
- Cairns
- Posts
- 229
hows this idea? attached to the shipping container using a locking type of fitting, i will make a fitting that will lock into place there when it is up on the set angle, when you put it in the hole in the container and move theother end upwards it will not be able to come out of that hole until its lowered again.
then the other end i will have an upside down U shape which will slot into the side rails so they will not be able to move out of position and the upside down U will have some feet welded on the bottom of them to sit on the ground.
the horizontal rails will be 65x35x2.5mm and 6m long and the vertical rail 50x4mm x 2m angle i have sitting around. the width at the end is 4m so splays out from the container to give me more room.
the 1.4m of straight out from the container is for the doors to open all the way out if needed without hitting the rails that start out at 2.6m high and go down to 2m high incase it rains to give it run off.
using an 8m wide by 7m long wide tarp to hang over the top and sides and a 4m x 3m tarp for the end of it. i will use some bricks to hold the tarp to the ground and rope to tie it to the rails where i can
whole setup will fold down flat and can be stored between the 2 containers there is a bit of space.
thoughts on this???
-
7th April 2024, 08:28 AM #15
We have had a lot of very strong winds lately so it needs to be very strongly attached so it dosn't blow away. Who ownes the carpark?
I am learning, slowley.
Similar Threads
-
Shed or Shipping Container?
By some_one in forum THE GARDEN SHEDReplies: 28Last Post: 28th June 2006, 02:20 PM -
Securing a shipping container
By Pulpo in forum GENERAL ODDS N SODSReplies: 6Last Post: 26th September 2003, 09:50 PM
Bookmarks