Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Jul 2007
    Location
    melbourne
    Posts
    2

    Smile help with skirting question/reno

    We are about to renovate/extend 1930's brick home and have gaps in the front rooms (which we are retaining) between floorboards and skirts and in negotiations with a building co. to do the job. They seem reluctant to replace the skirtings and instead just adding a small strip of timber to hide the gaps (as though they are part of the original skirting). Some of the gaps are a good inch between floor and skirts. There will still be gaps where the architraves are though which won't matter where we carpet but will show in hallway as we intend to keep just floorboards. I am wondering if this sounds reasonable, being a newbie to renovation, would it cost too much to rip out old skirtings and start again??? Is there another solution??? The new skirtings for the new extension are going to be bigger than the original, is that going to look dodgy. I would rather get it right now even if it is going to cost a bit more. Any advice would be gratefully appreciated.

    Thanks

  2. #2
    Join Date
    Nov 2004
    Location
    Redlands area, Brisbane
    Posts
    93

    Default

    Hard to say definitively. If you want to get the same mouldings that were used originally you will probably have to have them made. It depends on the original quality of the house (not everything made in the 1930's was brilliant) whether this is worth the cost. Only you can tell us that as there isn't a lot of detail in your post.

    Photos and more detail please.

  3. #3
    Join Date
    Nov 2006
    Location
    Melbourne
    Age
    65
    Posts
    20

    Default

    Removing old skirtings invariably leads to a fair bit of damage to existing plaster (assuming hard plastered or lathe and plaster walls), so if you remove them, expect substantial plastering work as well. Leaving them in place would be the normal method, if they don't need replacing in themselves.
    It's not unusual to cover gaps as described, some people just use quad, which doesn't look fantastic IMO, but each to his own.
    Cheers

    TM

  4. #4
    Join Date
    Jan 2007
    Location
    Goulburn NSW
    Age
    89
    Posts
    7

    Default

    In the old days before cost cutting, a quad was fitted to the skirting to hide any differences. Would that work? If not what I have done in the past was to cut out the short boards back to a joist and install a longer board.
    les

  5. #5
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    It sounds like the stumps are gone and the floor has dropped leaving a gap between the skirting & floor.

    So have the stumps checked out before you start renovating.
    Regards, Bob Thomas

    www.wombatsawmill.com

  6. #6
    Join Date
    Nov 2004
    Location
    Redlands area, Brisbane
    Posts
    93

    Default

    Quote Originally Posted by TermiMonster View Post
    Removing old skirtings invariably leads to a fair bit of damage to existing plaster (assuming hard plastered or lathe and plaster walls),
    I've had a fair bit of success using a Japanese cats paw with the thin pry end.

Similar Threads

  1. Cutting Scribed internal corners on skirting boards.
    By bpj1968 in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 6
    Last Post: 26th September 2007, 07:02 PM
  2. Lino floors and skirting boards
    By peter_sm in forum PAINTING, PLASTERING, TILING, DECORATING, etc.
    Replies: 5
    Last Post: 27th February 2007, 03:46 PM
  3. Floating floor and skirting trimmer
    By hislopal in forum FLOORING
    Replies: 1
    Last Post: 6th June 2006, 10:27 AM
  4. Gap between skirting board and floorboards
    By DavidC in forum FLOORING
    Replies: 5
    Last Post: 1st February 2005, 02:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •