Results 1 to 3 of 3
Thread: patching fibro
-
22nd February 2007, 04:43 PM #1
GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Port Huon
- Posts
- 373
patching fibro
I've a small patching job (a hole about 60mm) on a fibro sheet.
I'd thought to glue a patch on the back of the hole and fill it from the front. What glue will stick to fibro for this purpose?Geoff
The view from home
-
22nd February 2007, 04:56 PM #2
Sawdust abuser
- Join Date
- Sep 2006
- Location
- Behind that little door under the thicknesser...
- Posts
- 44
Liquid nails or similar will be fine.
Ours is not to reason why.....only to point and giggle.
-
23rd February 2007, 08:15 AM #3
SENIOR MEMBER
- Join Date
- Jan 2006
- Location
- Melbourne
- Posts
- 722
Or you could probably do it with builders bog and also fill the majority of the hole at the same time ... then just top coat. Just put a little screw or nail in the middle of the patch to hold it while the glue dries (if it's too heavy to stay there itself).
Reply With Quote
Similar Threads
-
Convert Fibro House to Cement Rendered House
By krm66 in forum CONCRETINGReplies: 9Last Post: 6th January 2007, 02:34 AM -
When did "bad" fibro stop being sold ???
By MICKYG in forum NOTHING AT ALL TO DO WITH RENOVATIONReplies: 8Last Post: 5th October 2006, 10:09 PM -
Patching Lath & Plaster walls
By slobs22 in forum PLASTERINGReplies: 4Last Post: 27th March 2006, 12:57 PM -
Fibro cement board
By Laurence in forum GENERAL ODDS N SODSReplies: 13Last Post: 19th March 2003, 12:24 PM
Bookmarks