![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Trim router base
-
27th June 2023, 04:35 PM #1
GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Sydney
- Posts
- 948
Trim router base
It’s a bit over the top but thought I’d share my newly turned handles for a trim router base I made out of 4.5mm perspex. They say use what you have laying around. And I had a block of this laying around. Enough for 2 handles.
IMG_8189.jpg
Mallee Burl resin casts. They’re slightly mismatched, I had a catch on the second one and I had already parted the first. Next time I will leave in tact until they both match.