![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: New shed
-
1st September 2007, 08:30 AM #1
Senior Member
- Join Date
- Jan 2004
- Location
- Melbourne
- Posts
- 0
New shed
I'm about to start building my new shed. 12mx 6.5m 2 storey.
Bottom level besser block with piers. top level horizontal stud wall and tin.
I have some windows which are 2.7mx 2.4m so i have to place lintels
across the tops of the windows and doors. The usual method is gal angels.
a friend told me he has seen concrete lintels. Does anyone know where i can get these? i'm in melb so melb places would be best.
-
2nd September 2007, 10:25 AM #2
-
2nd September 2007, 11:02 PM #3
Senior Member
- Join Date
- Dec 2006
- Location
- Outer East - Melbourne
- Posts
- 265
Ashphalt driveway
We have decided on an Ashphalt driveway. The sides will be lined with the few hundred bricks we have. The sides I can do. Does anyone have any recommendations or references for someone who will quote the asphalting? It is about 80 sq m
I have a couple of contacts I will try from the Yellow pages also, but there does not appear to be many.
-
3rd September 2007, 09:03 AM #4
-
3rd September 2007, 10:06 PM #5
Senior Member
- Join Date
- Nov 2005
- Location
- Kilsyth
- Age
- 66
- Posts
- 300
-
4th September 2007, 08:10 AM #6
Senior Member
- Join Date
- Jan 2004
- Location
- Melbourne
- Posts
- 0
shed
I asked the brickie if he wanted me to organise a crane for the 300 Ub's.
i said i can design and build a simple crane gantry to lift the beams in place...a 3m lift. he said, what do they weigh?..i told him they are 300 x 32..so about 200kg.....he said don't worry about it...we will lift them up on ladders.
Anyway i hope to kick off in the next 2 months. I already have the slab done
-
4th September 2007, 09:45 AM #7
Similar Threads
-
Power and insulation to the new shed
By har616 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 14Last Post: 15th January 2007, 11:54 PM