Results 1 to 12 of 12
  1. #1
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    1

    Default Lighting for routers

    I have a few routers, which get occasional use. Over the past year or so I have been experimenting with a Makita trim router for removing waste from half-blind dovetails (see link below if interested).


    The only issue I have with the little Makita is that it does not have a built-in light, which makes seeing details a little more difficult. It is a powerful and nimble router, with excellent dust control. I wanted to improve this one area. So I have looked around for quite a while at several strategies, such as training a spot light or clamping on a book light. These are have short comings.


    A few weeks ago, I received a notice from Lee Valley about a Task Light they were offering. It was designed for their router base. And cheap ($15 USD). I ordered a few.





    These are very small LED flashlights. They attach to a holder with rare earth magnets. The holder is screwed to the base of the router. I will show ways I have done this with mine.


    In addition to to the trim router, the router I like for general use is this old Elu ...





    There was a convenient hole for the screw holding the flashlight stand ...





    And on ..








    The Makita trim router that started this search ...





    The stand was attached to the secondary base ...





    This is how it in use before the light ...





    Now light one ...





    The Makita comes with a plunge base as well, and this is a useful router for inlay and smaller details.





    The holder screws into one of the fence rod knobs. Only one knob is needed (the other side only uses one), so it is a convenient spot. Not perfect, but the best that I have come up with so far.





    Light off ...





    Light on ...





    I hope this helps someone.


    Regards from Perth


    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  2. #2
    Join Date
    May 2011
    Location
    Albury
    Posts
    279

    Default

    Derek, you've pictured two different trim routers and called them both Makitas.

  3. #3
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    1

    Default

    You ... have eagle eyes!

    Yep, one is Makita and the other is “that” copy ... but both are in Makita bases.

    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  4. #4
    Join Date
    Feb 2007
    Location
    blue mountains
    Posts
    3

    Default

    Could find a few other places to use one of those lights. Bandsaw comes to mind. I use a magnetic base flex neck LED at the moment but can be a bit of a fiddle getting the light just where it's most needed. That little light would be a tidier fix.
    Regards
    John

  5. #5
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    1

    Default

    John, I tried so many lights in the past year. This book light was relegated to the drill press (pretty good there) after first the router and then the bandsaw ...



    .. then replaced by button lights (I posted these lately) ...







    ... and finally by a bicycle light ...








    I am waiting on delivery of a different light from LV for the bandsaw. I will post about it after it arrives: Battery-Powered Magnetic LED Orb Light - Lee Valley Tools


    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  6. #6
    Join Date
    Feb 2007
    Location
    blue mountains
    Posts
    3

    Default

    Thanks for pointing out those lights. Being LV I was surprised how little they cost. Time I had a serious look at what else is out there to help about the shed.
    Regards
    John

  7. #7
    Join Date
    Oct 2008
    Location
    Perth
    Posts
    0

    Default

    This is a really useful thread. I have found lately that my shed lighting is leaving a lot to be desired. Something to do with my ageing eyes as well I suspectd.

    I have considered adding a drop ceiling into my shed to bring my flouros to the work area, but this is a longer term idea.

    I like the idea of these smaller lights which can attack to the tools in question. I did experiment with some led strips but they required plugging into a power source which was non optimal.

    I think I will give these little fellows a go (or at least something similar from Banggood which might be cheaper).

  8. #8
    Join Date
    Jul 2015
    Location
    Hunter Valley
    Age
    56
    Posts
    106

    Default

    Quote Originally Posted by orraloon View Post
    Thanks for pointing out those lights. Being LV I was surprised how little they cost. Time I had a serious look at what else is out there to help about the shed.
    Regards
    John
    Dangerous territory that Lee Valley site, be assured of that!

    One thing I got from them that I enjoy using, mainly if you're a person who has some MFT work surfaces, is this: https://www.leevalley.com/en-ca/shop...led-work-light which you team up with this: https://www.leevalley.com/en-ca/shop...led-work-light and this: Dog-Hole Posts for Magnetic-Mount LED Work Light - Lee Valley Tools

    It effectively gives you a flex-head worklight that you can stick into an MFT size dog hole.

    I have another couple on my wish list for the next LV order.

  9. #9
    Join Date
    Apr 2007
    Location
    Sydney
    Posts
    37

    Default

    I've nee meaning to experiment using the current rage in smartphone accessories - selfie ring-lights.

    ringlight.jpg

    These are cheap from FleaBay, Amazon or AliExpress e.g see this link (might not persist as its Amazon, but if not just search for selfie ring light)

    Also considering one of these for drill press - from Tormach - here's their link 32700 - Pro Ring Light with SuperBright LEDs
    32700_Pro-Ring_Light_IMG_8924.jpg

  10. #10
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    1

    Default

    Ross, I have a few of these rings at home, ordered for routers. I have no doubt that they illuminate well, but attaching them is not so easy (the air vents become obscured), and then they need 12v batteries, which are not tiny (well, I have not found one the size of a 9v battery). So I passed on them and went searching elsewhere.

    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  11. #11
    Join Date
    Mar 2020
    Location
    Scottsdale, Arizona
    Age
    34
    Posts
    1

    Default

    Nice

  12. #12
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    I bought two of these for my drill press, there are various sizes available.

    100mm White COB LED SMD Angel Eyes Halo Ring Fog DRL Light Bulb With Lampshades | eBay
    CHRIS

Similar Threads

  1. Down lighting
    By Reno RSS Feed in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 22nd August 2009, 07:10 PM
  2. Lighting
    By Loki429 in forum LIGHTING
    Replies: 1
    Last Post: 12th January 2007, 01:35 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •