Woodworking Quiz 5/5/04

[Ralph Jones]

Good Morning Mates,
I trust you all had a good nights sleep.

I hope you have your thinking caps on this morning as we are about to figure some concrete for a patio.

The patio is going to be 3.65M x 4.87M x 101.6mm.

How many cubic metres of concrete will it take to pour and finish it?

I do know the answer as I first figured it out in feet and inches and then converted to your metric system.

Respectfully,

[AlexS]

In round figures, 2 cubic metres...and there's a bit left over to pour the barbeque slab that's boxed up in case there's a bit left over.

[Tonz]

Imperial - Assuming original size is 12' x 16' x 4"

convert inches to feet 12' x 16' x .333' = 63.994 cubic feet
convert cubic feet to cubic yards (divide by 27) = 2.37 cubic yards

Allow 10% for safety = approx 2.6 cubic yards

Metric - 3.65 x 4.87 x .1016 = 1.806 cubic metres

Allow 10% for safety = approx 2 cubic metres..

You can reduce quantity by about 1 cubic metre for each disposed dead body in the mix although concrete slabs tend to be not as efficient at hiding bodies as much as larger concrete support type structures...

[jackiew]

if you're going to bury a body in a 4" thick slab I think you're going to have to steam roller it flat first ......

[bitingmidge]

Wow, three replies and not one has noticed that this isn't a WOODWORKING question!!

Cheers,

P

[Ralph Jones]

Hello Mates,
Though I know it is only a little after noon down there it is 10:00 PM here so here is the answer for the quiz;
As already mentioned it is not a woodworking quiz but a construction quiz and you are correct as the answer is 2 cubic metres.

Tomorrows quiz will definitely be a woodworking quiz.

Thanks for your support.

Respectfully,

[Bob Willson]

Well I didn't look at the other answers first but worked out the answer as being EXACTLY 1.8059908 cubic metres

Now I've just got to find a concrete company with accurate measuring equipment.

[ozwinner]

Hey Bob, you have the same calculator as me...

Al

[Sturdee]

I would like to know where you would get a concreter that would lay a slab 101.6mm thick.

Peter.

[Bob Willson]

Same place that you get a concrete supplier that will sell you EXACTLY 1.8059908 cubic metres of concrete.

[bitingmidge]

My concretor laid a slab 101.6mm thick, also 123.85 mm thick, also 94.2mm thick also......... :mad:

Now do you want to know how deep the puddles were??

Thanks to the miracle of modern grinders and epoxies, it's now level, and 111.6mm thick!

cheers,
P

[ozwinner]

OK. so what epoxy stuff did you use?
I have some concrete that unfortunatly slopes towards the house, instead of away, and I would like to fill the puddle, only prob is, its coloured concrete.

Al