Page 1 of 2 12 LastLast
Results 1 to 15 of 23
  1. #1
    Join Date
    May 2011
    Location
    Albury
    Posts
    279

    Default 1/2" Solid Carbide Spiral Upcut Bit

    Evanism has posted a review in his blog -

    Upcut carbide 1/2" bit

    Rate this Entry

    0 Trackbacks 0 Comments
    by Evanism
    , 6th May 2015 at 06:38 PM (1 Views)

    First and last impressions: 5 out of 5. BUY IT. Excellent price and excellent finish.

    Today I used the solid carbide 2 flute upcut router bit from ALDAV for the purposes of review and actual work. These are sold on the WoodWorkersForum.com and Ebay trading as Aldavs_store: http://stores.ebay.com.au/Aldavs-Store .

    Traditionally upcut and downcut cutters are rather specialised. For the handyman they are a very expensive luxury. For low cost operations or a small shop they are aren't a necessity - work can be achieved with straight cutters (carbide or HSS). Good quality straight cut bits are still quite expensive. Professional shops or small volume high quality craftsmen will buy a spiral carbide cutter due to their absolutely superior finish. The above facts are a given - very few craftsmen would question them.

    For background, I make a very wide range of children's furniture commercially as well as high end (read: expensive) decorative boxes. I'm a commission craftsman with a wide remit. The workshop is fully stocked with high end, premium quality equipment, tools and accessories and it all gets a good flogging daily. Think great care: but fully used - they are not toys or show-ponies. They are tools for income.

    This cutter was offered by ALDAV to trial. We were talking on the WWF about the qualities of carbide cutters and how getting a HIGH quality, decently priced spiral cutters that lasted was nearly impossible. It is very easy to spend $350 or $400 on a professional one. He offered me the trial of his newest model to trial in a commercial environment and offer an honest review.

    Today I mounted the cutter in a Triton TRA001 router fitted to a Kreg lifter plate. I also have a Festool and BenchCrafted lifter, but the Triton is my go-to workhorse. It typically runs 15 to 20,000 rpm and fitted to a fully boxed dust extractor. Today I made boxes. Lots of boxes. They were made on commission for an international sports company to give to an international team for medals for a major world-wide event (I cannot disclose who yet). The quality of work needed to be *extremely* high. Fine boxes invite very close scrutiny - mistakes have nowhere to hide. Errors would cost a great deal - timbers were Qld Blackwood, WA Lace sheoak and birdseye maple highlights. Each is a nightmare. Blackwood loves to chip, rip out and burns deeply faster than unwatched toast when cut. Lace sheoak is eye wateringly expensive and birdseye maple shows Every Single Trivial Mistake.

    I took a big risk to use this cutter on a job like this, which had been sitting in the selector for 4 weeks, but this was exactly the reason it was purchased for. I needed a first-rate ultra clean cut for mortising, ultra fine jointing and fine edge finishing. The bit did exactly what I wanted, first time, right through the entire job. Lid and base mortising were clean and sharp, edging/jointing was very sharp (I use an Incra Wonder Fence as a micro-edge jointer for box work) and the finger box joint edging cleaned up perfectly.

    The upcut performed flawlessly. The cuts were ultra smooth, very crisp and clean on both top cuts and edge cuts. It was used a lot and remained as sharp as when delivered. Two thumbs up. I decided to use my existing bits as a test on a some off-cut scraps of the Blackwood to see if the upcut was indeed working better or if it was my imagination. It wasn't my imagination. The existing straight carbide bits left either bottom fuzz (an expensive almost new one), chipped (my "old trusty") or burned (both did, here and there, but far worse when moved slowly). They both would have left me with a lot of cleanup work - and if you've friction burned blackwood, you'll know how deep it goes - a bastard thing to happen on a finely crafted box.

    This upcut is also noticeably quieter in operation. I hate excessive noise in the shop. A very well designed spiral upcut sounds smooth and operates vibration free during the cut. This one has these qualities.

    The bit itself is remarkably nice. It is really sharp out of the pack (unusual for carbide - HSS is normally a lot sharper on the "thumb test"), it is well polished with no manufacturing errors, the carbide is fine and visually it looks very nice. It comes delivered capped and encased in a pop-click enclosure.

    So, all up, I would highly recommend its purchase. It is an excellent tool and priced very well - low enough for the home woodworker looking for an excellent finish. I would also VERY highly recommend it for the pro woodworker too "


    Any of you who know Evan know the value you can place on his opinion. I can tell you how good these are as many times as I like, but nobody listens, so it's good to have an independent opinion that confirms my own. Fell free to PM me if you have any queries.

    Cheers,
    David

  2. #2
    Join Date
    May 2012
    Location
    Canberra
    Posts
    122

    Default

    Hi Dudes,

    I wanted to add a new addendum.

    I've used the bit EXTENSIVELY over the last week and a bit. I've made a giant pile of boxes.

    The bit has lost a tiny fraction of the ultra sharp edge, but it is trivial. It cuts exactly the same and the finish is fantastic.

    I'd definitely buy it again.

    If it came as a down-cut, I'd buy SIX!

  3. #3
    Join Date
    May 2011
    Location
    Albury
    Posts
    279

    Default

    Well Evan, as I said to you I might just try to sell a few of these prior to outlaying thousands of more dollars on downcut bits. Besides, my financial situation appears to have quite a few characteristics in common with your own, rich we aint!

  4. #4
    Join Date
    May 2011
    Location
    Albury
    Posts
    279

    Default

    I recently sold one of these bits in the 1/4" size to forum member derekcohen. Derek has been building a lingerie chest, which he has covered in a thread in the Woodwork - General > BIG STUFF section of the forum and on his own web site here - http://www.inthewoodshop.com/Furniture/index.html. I'm sure you will agree that he crafts beautiful pieces. There is also a mention of what he required the bit for in this thread regarding the merits of various methods of cutting mortices - https://www.woodworkforums.com/showthread.php?t=197796

    Judging from his comment, "the 1/4" carbide up cut router bit is terrific!", about the bit in this thread - https://www.woodworkforums.com/showthread.php?t=199806 - he is pretty happy with it.

    I still have plenty of these available in the four sizes and , as with all my other products, they are available at a discounted price through the forum. Just PM me.

    Cheers,
    David

  5. #5
    Join Date
    Sep 2006
    Location
    Brisbane
    Posts
    0

    Default

    I was just about to search for this thread. I bought a 1/2" bit via ebay and will be PM'img to buy 2 more and a 1/4". Very impressed with the cut quality when used on the CNC.

  6. #6
    Join Date
    Jul 2006
    Location
    Port Huon
    Posts
    373

    Default

    I too would like a down-cut but but in 1'4" . None on your eBay page (yet) but I've ordered a 1/4" - 1/8" adaptor for my Makita RT0701 router.

  7. #7
    Join Date
    Sep 2006
    Location
    Brisbane
    Posts
    0

    Default

    Downcut would be nice, as would 50mm cutting length, but I'll take what I can get for the price

  8. #8
    Join Date
    May 2011
    Location
    Albury
    Posts
    279

    Default

    Hi dpm and snowyskiesau,

    Thanks for your support. I am looking at getting some downcut and extended length/different diameter bits in the next order. Won't be happening until I sell a few more of the current stock though. I have a few products on the water at the moment, which should be here over the next few weeks; all clamps and cyclones though. If only I had more money to buy stuff and somewhere to store it all. There are plenty of good products out there. Come to think of it I'd settle for the money. If you have enough of it the storage problem solves itself! Just have to purchase that winning lotto ticket.

    Cheers,
    David

  9. #9
    Join Date
    Nov 2010
    Location
    Perth W.A
    Posts
    76

    Default

    A very informative review,I bought a carba-tec up-cut version a couple of year back.
    these cutters are expensive but the cut they produce is superlative,I use mine almost exclusively for loose tenon work.
    I am looking for a smaller diameter one to my 1/2" and will certainly look into these.

  10. #10
    Join Date
    Jan 2015
    Location
    Australia
    Posts
    2

    Default Just the info I need right now

    Thanks for this review - I'm just about to start building an entire new kitchen for myself using all mortise and tenon joinery and I'll definitely get one of these now that I know how useful they are. I see they also have sets of 4 on ebay for $162 which is a $20 saving over buying them individually.

  11. #11
    Join Date
    Jun 2016
    Location
    Bassendean
    Age
    70
    Posts
    5

    Default

    Just used the upcut 1/2" bit for the first time. I am impressed, no tear out, clean cuts and hardly any woodchips on the table, wish I'd tried these earlier. Will be saving up for the 3/8" and 1/4".

  12. #12
    Join Date
    Jun 2016
    Location
    Brisbane
    Posts
    3

    Default

    Hi Aldav,

    I see that you also sell Freud and Whiteside upcut carbide bits as well. Can you comment on the cut quality of all 3. The Freud and the Whiteside are understandably bit more expensive, but do either cut better than the JN bits ?



    Mike

  13. #13
    Join Date
    May 2011
    Location
    Albury
    Posts
    279

    Default

    Quote Originally Posted by Belstaff1464 View Post
    Hi Aldav,

    I see that you also sell Freud and Whiteside upcut carbide bits as well. Can you comment on the cut quality of all 3. The Freud and the Whiteside are understandably bit more expensive, but do either cut better than the JN bits ?



    Mike

    It's probably better for me to leave it to others to comment on this Mike as my view may possibly be considered biased. I picked up the Whiteside and Freud bits - they are mainly compression bits - as a job lot from a seller in the US who was getting out of them and am unlikely to be able to get any more. There's a review on the 1/4" Jinoo bit here - huh, looks like it's been deleted, thanks admin!

    David

  14. #14
    Join Date
    Jun 2016
    Location
    Brisbane
    Posts
    3

    Default

    I respect your decision David, but I doubt there would be many people let alone members that have used all 3 brands of bits to be able to make a vaild comparison.

  15. #15
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    596

    Default

    I have the Whiteside 1/2 inch upcut bit as well as a set of Aldav's upcut bits. I cannot say that I have used them extensively since I am only a weekend woodworker but I have used them all on a range of Australian timbers as well as some radiata and have found that Aldav's bits more than hold their own. The only issue that I have with Aldav's bits (and as you can see it is a good issue to have) is that they are so sharp I have cut myself on them a number of times. I don't seem to have the same "issue" with the Whiteside bit. Mind you, I am not knocking the Whiteside bits as I am very pleased overall with the "basic" set I bought from them.

    What I do find is that I automatically reach for one of Aldav's bits when I have a critical task. That is a very subjective assessment of course.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •