![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Adventech start up kit
-
26th January 2014, 07:35 PM #1
58snooker
- Join Date
- Jul 2009
- Location
- Cranbourne,Victoria
- Posts
- 72
Adventech start up kit
Advantech-Start up Kit(Everything all But New)
Saw Blade 250mmx3.2mmx30mm bore-80TFZ(New Slight rust)
Planer Blades(3 in plack) 310mmLx25mmx3mmThick(New)
HSS Set Mortising bits with Chip Breaker(6mm-!6mm,6 different sizes)NEW
Universal Cutter Head,90mm diax40mmHx30mm Dia Bore(Comes with Two Cutter Straight 40mm has chip breaker-50mm doesn't)Have test this one,Next to New..
THIS IS PICK UP FROM CRANBOURNE,MELB
-
27th January 2014, 10:47 AM #2
Senior Member
- Join Date
- Dec 2010
- Location
- Caloundra, Sunshine Coast, Qld
- Posts
- 354
Morticing bits
Hi Bill,
Can you please tell me if the morticing bits will fit a Westcott chuck (ie. Do they have a flat on one side of the shank)?
Thank you.
Kind Regards
Ben
-
27th January 2014, 06:46 PM #3
58snooker
- Join Date
- Jul 2009
- Location
- Cranbourne,Victoria
- Posts
- 72
-
27th January 2014, 08:26 PM #4
Senior Member
- Join Date
- Dec 2010
- Location
- Caloundra, Sunshine Coast, Qld
- Posts
- 354
Thanks
Thanks for letting me know, Bill.
Similar Threads
-
Where do I start?
By neksmerj in forum FINISHINGReplies: 1Last Post: 15th November 2006, 10:14 AM