Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Spindle Moulder / Router Table
-
7th April 2014, 07:17 PM #1Senior Member
- Join Date
- Jul 2008
- Location
- Melbourne
- Age
- 49
- Posts
- 109
Spindle Moulder / Router Table
I have for sale an LS. Barker Spindle Moulder.
This machine currently has a 3HP, 3 phase motor.
If the buyer wishes, I would be happy to replace this motor with a 3HP 1 Phase I have in the shed.
Included is a spindle to suit 1/2" router bits, making it a very sturdy router table.
The bearings appear to be good with no slop. The up and down travel is smooth and has adjustable slide ways meaning they should always stay tight. The table is rust free, flat and smooth. There is a removable section of the table enabling larger moulder bits.
I would also be happy to make a steel/timber fence if required.
I ask anyone interested in the machine to make contact with me to discuss what you need as I am keen to see someone else get plenty of use of it.
I am looking at a price between $200 and $300 with the 1 phase motor and a new fence. Less if you want it as is.
I am located in Wantirna 3152 and can assist with loading.
Thank you. Andrew.
0404 808 034
[email protected]