Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2007
    Location
    sydney
    Posts
    1

    Default air conditioner gas leak

    I have a ducted air conditioner, it is fifteen years old, in that time it has had about four gas leaks.Each time I had it re-gassed I was assured that it shouldn't leak again.
    The last time I had it re-gassed I was charged $600 [$360.00 for the gas alone]
    My dilemma is whether to try and persevere with attempting to find the leak or bite the bullet and purchase a new unit, although the unit works well until it runs out of gas.
    I was told by a mechanic that nitrogen would have to be pumped into the unit to detect the leak,but I feel that this would probably cost me close to $1000 based on the previous charge.
    Am I throwing away good money after bad ?

  2. #2
    Join Date
    Mar 2007
    Location
    Canberra
    Age
    72
    Posts
    52

    Default

    Am I throwing away good money after bad ?

    Yep - after 15 years that is past the economic life of an air-conditioner.

    If you want to stay with refrigerated A/C the newer models are much more efficient and the cost has dropped dramatically.

    But . . . they are still expensive to replace and even more so to run so I reckon you should be looking at more environmentally friendly, but effective ways of cooling such as evaporative coolers (if you are in a hot dry climate), fans, air chimneys, upgraded insulation, external shading etc.

    With a little bit of research I reckon you can stay as cool, help the environment and on top of that save heaps too. The way energy cost are going any change to sustainable cooling now will return you well for a long time - and a big amount.

  3. #3
    Join Date
    Dec 2006
    Location
    Canberra
    Age
    45
    Posts
    93

    Default

    Quote Originally Posted by Bloss View Post
    Am I throwing away good money after bad ?

    Yep - after 15 years that is past the economic life of an air-conditioner.

    If you want to stay with refrigerated A/C the newer models are much more efficient and the cost has dropped dramatically.

    But . . . they are still expensive to replace and even more so to run so I reckon you should be looking at more environmentally friendly, but effective ways of cooling such as evaporative coolers (if you are in a hot dry climate), fans, air chimneys, upgraded insulation, external shading etc.

    With a little bit of research I reckon you can stay as cool, help the environment and on top of that save heaps too. The way energy cost are going any change to sustainable cooling now will return you well for a long time - and a big amount.
    Don't waste your time and money on a swampy (evap cooler) in Sydney.

    You will find the copper pipes in the unit have work hardened and will continue to crack so you will be throwing good money after bad.

    You already have the ductwork in place so a replacement shouldn't be too bad. It will still cost a few $k but the result will be a new unit with about a 5 yr warranty.

  4. #4
    Join Date
    May 2005
    Location
    Newcastle
    Age
    73
    Posts
    1,064

    Default

    Timmo's right mate the ducting is a big part of the cost and a new system will be far more efficient and the running costs will be a lot less
    Ashore




    The trouble with life is there's no background music.

Similar Threads

  1. diy air conditioner installation
    By Pulpo in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 11
    Last Post: 17th December 2007, 02:27 AM
  2. Anti-rust protection outdoor Air Conditioner
    By tetra in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 1
    Last Post: 18th June 2006, 08:39 AM
  3. Compressed air connectors leak
    By arose62 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 2
    Last Post: 23rd May 2006, 06:15 PM
  4. New Ducted Air conditioner
    By Luxur in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 5
    Last Post: 28th February 2006, 06:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •