![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
-
21st June 2010, 10:44 AM #1
Novice
- Join Date
- May 2010
- Location
- gold coast
- Posts
- 0
what is the best sander for rounded obhects
im sanding a tree stump just wondering is there any specialty sanders i might not know about that would be better than elbo grease cheers,,,,
-
21st June 2010, 01:55 PM #2
I find a small angle grinder with one of those rubber backed sanding discs as good as any tool for free hand shaping. Just work through the grades of abrasive, from 40P or 60P to 80 then 120.
CheersAndy Mac
Change is inevitable, growth is optional.
-
25th June 2010, 06:54 AM #3
Senior Member
- Join Date
- Jun 2010
- Location
- Arkansas USA
- Age
- 85
- Posts
- 0
Sounds like a project made for flap sanding.
-
29th June 2010, 09:02 AM #4
i did one similar to youres some years ago and theres a post on it on carving ,page 5 in a thread called carvers gallery . tools i used were arbo carver ,mini arbo, dye grinder with typhoon bits from carbatec and for sanding ive got a kirjes sanding system which is small inflatable drums with sanding sleeves fitted ,its now one one of the most used tools im the shed .good luck and keep us posted with some pics
-
3rd July 2010, 07:42 PM #5
Novice
- Join Date
- May 2010
- Location
- gold coast
- Posts
- 0
hey guys here's the work so far been tough going and havn't had enough spare time enjoy...
https://www.woodworkforums.com/member...side-55hrs.jpg
https://www.woodworkforums.com/member...gle-55-hrs.jpg
still deciding on what type of finishing i will use...<!-- google_ad_section_end -->
-
4th July 2010, 10:49 AM #6
Wow - that is really starting to look more impressive!
Box Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
Similar Threads
-
Rounded Deck Corner
By SenojNW in forum DECKINGReplies: 3Last Post: 10th May 2007, 05:57 PM