![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Maintaining off the Lathe Finish
-
12th January 2011, 10:50 AM #1
Maintaining off the Lathe Finish
When I turn a bowl or some such item, it comes off the lathe looking a million dollars thanks to EEE and Shellawax.
When it's my own item I occasionally re-chuck and refinish but what do I recommend a customer do?
Is there a ubeaut product specifically designed for this? If so can I get it in a small bottle to supply to the punter or do I recommend a purchase or something else?
Forgive my naivity.Last edited by barnsey; 12th January 2011 at 10:51 AM. Reason: Fat fingers
Perhaps it is better to be irresponsible and right, than to be responsible and wrong.
Winston Churchill
-
13th January 2011, 07:54 AM #2
Traditional Wax for upkeep of decorative bowls Polish Reviver for functional bowls.
Cheers - Neil
-
13th January 2011, 11:49 AM #3
Knew you would have the answer - guess I just didn't look deep enough into the ubeaut site - thanks
Perhaps it is better to be irresponsible and right, than to be responsible and wrong.
Winston Churchill
Similar Threads
-
Maintaining bore pumps
By Reno RSS Feed in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 0Last Post: 13th January 2009, 10:50 PM -
Maintaining the finish
By Gavin04 in forum FINISHINGReplies: 3Last Post: 7th September 2005, 03:05 PM