![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
1st June 2009, 06:50 PM #1
angle between tiles and carpet -gap?
Do I lay the tiles dead flat against the angle or do i leave a gap for grout between the tiles and angle?
Also if im starting my ist row at the angle..... could i use this as a straight edge to run the whole show off----> if i get it straight enough?
Im laying slate so spacers will be about 10mm and done by eye anyway so its no big deal if its not perfect....
oh also.... as you spread your glue all over the floor then lay tiles on top... im guessing you just leave the glue in the joints to dry and not try and scrape it out or anything.... then simply grout over, right?
thanks
Read the full thread at RenovateForum.com...