![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Nail gun for floorboards
-
16th November 2008, 07:03 AM #1
Nail gun for floorboards
Hello, I am soon going to be installing Tas Oak floorboards over floor joists, they floorboards are 108mm wide and 19mm thick. The joists are 400 to 450mm apart.
I will be top nailing, and I was wondering if it was suitable for me to use a Paslode finishing gun, (which fires 50mm brads), or a Senco FinishPro 35 (which also fires 50mm brads)
Thanks,
Zac
More...
Similar Threads
-
Solid Timber floorboards - glueing direct to concrete versus glue/nail to boards
By mcchristof in forum FLOORINGReplies: 3Last Post: 2nd June 2006, 07:55 PM -
Hand Nail or Nail Gun??
By jchristie in forum FLOORING, DECKING, STUMPS, etc.Replies: 8Last Post: 2nd May 2006, 07:31 PM