![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: WIP small silky oak desk
-
21st November 2009, 09:51 AM #1
Member
- Join Date
- Feb 2008
- Location
- Brisbane
- Posts
- 12
WIP small silky oak desk
G'day All,
Bought a desk for my son, who starts prep next year, but it is painted in lovely (not) 70's lime green.
I will post some photos when I reduce the file size.
Question...I have remove 99.9% of the paint from the top, but there is white undercoat still in the grain. I am using 0000 steel wool and metho, which seems to be working, but I was wondering if acetone may be better.
Stuart J.Last edited by brizylad; 21st November 2009 at 03:34 PM. Reason: images added
-
22nd November 2009, 05:54 PM #2
This is a copy of an earlier post.
Paint will stay in the grain of oak.
I use a feast watson "Old Baltic Pine" Stain to reduce the appearance of the white.
Stripping Paint: Method of stripping I use...
- I find the best stripper is the methyl chloride variety (any brand)
- Paint on stripper and leave until paint softens.
- Strip off using a paint scrapper.
- Apply another coat of stripper.
- If more paint is to be stripped then use a paint scraper OR
- If majority of paint has been removed then use coarse steel wool to remove residue.
- Finally wash the surface with metho and steel wool. (This should remove all the paint on timber, but if oak and open grain then some paint remains in the grain.)
- I suggest leaving the door until last. Get the skill required first on drawers. The paint in the corners of the door panel can be removed with a point or sharp knife.
- What sort of sander do you have?
- If you need to buy a sander, consider purchasing a 125mm random orbital sander. (It will do the majority of sanding tasks.)
- Sand all exterior surfaces with 80 or 120 grit.
- Fill all holes and gaps with wood stop. (If new handles are used the screw pitch could be different!)
- A clear finish will look attractive.
- If the cabinet is to be painted, then do it in enamel, undercoat and top coat.
- What finish do you intend to use?
Hilton
-
23rd November 2009, 12:47 PM #3
Member
- Join Date
- Feb 2008
- Location
- Brisbane
- Posts
- 12
Thanks Hilton
I remember reading your post when it came up in my searches.
I have a belt and orbital sander. Haven't used the belt on the desk yet, but I think I used the orbital with 80 grit before I took the photos.
I want to do a clear finish following Wongo's instructions. I have had good results in the past.
Stuart J.