Results 1 to 5 of 5
  1. #1
    Join Date
    May 2020
    Location
    Melbourne
    Posts
    4

    Default Replacing old zig zap clips

    Hi all,

    I'm currently fixing a 60's sofa by Wycombe Indsustries before taking it to get upholstered.

    Looking to get some advice on the best option to replace the old clips holding the zig zag springs.. (See attached photo for reference)

    95769518_3086512241392111_1448611410023022592_n.jpgWould the EK clips I've seen around be suitable? My only worry is that the springs will then sit higher up than originally intended and possibly ruin the look once the cushions go on.

    Appreciate any advice!

    Cheers

  2. #2
    Join Date
    Oct 2012
    Location
    USA
    Age
    63
    Posts
    3

    Default

    Hi Toby,

    I'm not a fan of these and if used I joint them in or make my own attachment assembly for them. Your idea sounds fine too! Good Luck!

  3. #3
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    Those clips are clearly in House manufacture, EK clips are designed for use with no sag springs once fixed just bend them down to suit

  4. #4
    Join Date
    May 2020
    Location
    Melbourne
    Posts
    4

    Default

    Yeah I was thinking I could possibly make my own but I'll probably end up just giving the EK clips a go! Are the springs pictured not no sag springs China?

  5. #5
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    Yes the correct name is no sag springs

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •