Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
26th December 2013, 07:37 AM #1GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,443
swap vic. laverton rough as waldown drill
hi a waldown drill . a 8sn series 3.
no motor. drill is all most all there.
maybe the worst table ever.
belt gaurd has been replaced with a
very nice fabricated number.
would like to swap for a slab.
aaron
-
26th December 2013, 10:31 AM #2
Aaron,
I would like this drill. When I visit for the other bits, I'll.bring the slab with me. ok?Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
27th December 2013, 12:28 AM #3GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,443
easy done
hi. its your mate no problem
-
28th December 2013, 12:00 AM #4
Thanks Aaron. Will communicate more by phone.
Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
28th December 2013, 11:01 AM #5GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,443
drill has gone
thanks