Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2007
    Location
    Woodend, Victoria, Australia
    Posts
    1

    Default cloudy finish under poly surface

    G'Day All,
    our kitchen has a tired old Tas Myrtle laminated bench top that has a typical commercial polyurethane type finish.

    It has several spots where a cloudy white layer has occurred under the finish, I suspect due to heat drawing the moisture out and being trapped under the finish.

    Any suggestions for repair; other than a complete refinish of the bench top?

    many thanks!

    Cheerio Ned

  2. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    You're down to a complete refinish, I'm afraid!

  3. #3
    Join Date
    May 2009
    Location
    mornigton peninsula
    Age
    47
    Posts
    7

    Default

    Hi,
    yeah that can happen when not enough time is left between coats, ive done it before.

Similar Threads

  1. How to get a decent finish on 2 part Poly-U
    By silentC in forum FINISHING
    Replies: 15
    Last Post: 10th May 2007, 07:21 PM
  2. MDF FINISH - Tung/Poly/Wax
    By dazzler in forum FINISHING
    Replies: 3
    Last Post: 13th February 2006, 04:56 PM
  3. How to get matt surface finish
    By cx3 in forum FINISHING
    Replies: 2
    Last Post: 28th August 2003, 05:30 PM
  4. Wipe on poly finish
    By Iain in forum FINISHING
    Replies: 3
    Last Post: 23rd April 2002, 05:31 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •