Results 1 to 8 of 8

Thread: LPG gas bottles

  1. #1
    Join Date
    May 2023
    Location
    Nimmitabel, Canberra
    Age
    73
    Posts
    315

    Default LPG gas bottles

    Gas bottles (ie. the type you see under a BBQ or on a caravan) need to be replaced or tested every 10 years. There is a date stamped (month & year) on them.

    So, is the date that's stamped on the tank the date when the bottle needs to be re-tested, or the date when the bottle was tested?

    I was considering using the exchange service you see all over the place. Bunnings do them. There were a lot of complaints on the Bunnings website saying that out-of-date bottles were up for exchange - past their re-test date.

    The Kleenheat website states that every bottle is tested when refilled. Perhaps the company fibs. Maybe the people who made the complaints don’t know how to read the date on the bottle, which gets back to my original question.

  2. #2
    Join Date
    Jun 2010
    Location
    Bundaberg
    Age
    54
    Posts
    160

    Default

    The date stamped on the bottle is the date of certification; add ten years to get the "life".

    Providing the bottle was inside of it's 10 yearly inspection date at the time it was filled I don't believe any regulation has been broken. The onus may be upon the retailer (Bunnings etc) to ensure that their stock is rotated to ensure that the bottles at the back don't end up sitting there for a year or so. If however the gas company aren't checking and refilling out of date bottles then it would appear that they may be negligent...

    Personally I use a very good local company (Bundy Hot Gas) who do check for this and also provide bottle recertification; I bought a recertified bottle from them just before Xmas for about 70% of the price of a new one.
    Last edited by Chief Tiff; 14th February 2024 at 02:12 PM. Reason: Minor change...
    Nothing succeeds like a budgie without a beak.

  3. #3
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    3,542

    Default

    Anything that is pressure related is always dated at the time of testing.
    Cheers

    DJ


    ADMIN

  4. #4
    Join Date
    Jul 2002
    Location
    Blacktown, Western Sydney
    Age
    59
    Posts
    76

    Default

    Slightly old thread I know, the Swap n Go at the petrol stations don't check the bottles as you return the empty one, I guess they get lots of out of date bottles returned. I never check the date on the bottle that I take, knowing that it won't be checked at return.

    Sent from my SM-S921B using Tapatalk

  5. #5
    Join Date
    May 2023
    Location
    Maroochydore
    Age
    76
    Posts
    140

    Default

    Quote Originally Posted by Jon View Post
    Slightly old thread I know, the Swap n Go at the petrol stations don't check the bottles as you return the empty one, I guess they get lots of out of date bottles returned. I never check the date on the bottle that I take, knowing that it won't be checked at return.

    Sent from my SM-S921B using Tapatalk
    I ALWAYS check the date on a bottle I am getting and if out of date I don't take it.
    It is worse if you get one leaking gas like I did.

  6. #6
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    385

    Default

    Some helpful fact sheets

    Test date = date of last test. So a bottle is "in test" or valid from test date plus 10 years IF the cylinder is undamaged and in good condition. (see below)

    https://www.commerce.wa.gov.au/sites...der_g035_0.pdf
    How to check if your gas bottle is out of date? - Statewide Gas

    It pays to have a good look at the bottles you use,
    LP gas cylinder testing | Resources Safety & Health Queensland
    Mobyturns

    In An Instant Your Life CanChange Forever

  7. #7
    Join Date
    May 2007
    Location
    Gold Coast
    Age
    71
    Posts
    456

    Default

    I don't know where phase out of POL fittings on 9kg bottles is up to, but I guess the next time any 9kg bottle is actually tested it will require its valve to be replaced?

    https://www.snowys.com.au/blog/pol-a...7-gas-fitting/
    Franklin

  8. #8
    Join Date
    Nov 2007
    Location
    melbourne australia
    Posts
    287

    Default

    Thanks Fuzzie. I'd never heard of LCC27 valves and apparently they've been fitting them for 3 years!

Similar Threads

  1. Glue Bottles
    By smidsy in forum HINTS & TIPS
    Replies: 1
    Last Post: 28th October 2018, 08:38 PM
  2. New Bottles
    By ubeaut in forum U-BEAUT POLISHES - Made in OUR back yard.... AUSTRALIA
    Replies: 6
    Last Post: 6th October 2015, 11:53 PM
  3. Eighteen Bottles
    By Barry_White in forum JOKES
    Replies: 0
    Last Post: 12th October 2004, 10:15 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •