Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2007
    Location
    Brisbane
    Posts
    1

    Default Removing a Granite Benchtop

    Hi
    We are in the process of renovating a kitchen and have just purchased an in situ kitchen that has to be removed. It has a approx 35mm thick granite top which is in 3 sections. The sections appear to be glued together with some sort of epoxy. I am led to believe that there is a solvent that is used in the industry to soften the joints and then the joints are gouged out with a knife.

    Not having done this before I am look for advice please .

  2. #2
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    723

    Default

    Just hire a wet saw or grinder and cut through (wet saw will give you a neater cut line); you don't really want to use the sort of solvents that work on epoxy (concentrated nitric acid) or you could try softening it with a heat gun (but the granite might suck too much heat out for it to work, you have to get it to about 150+ degrees to weaken the epoxy)

  3. #3
    Join Date
    Aug 2004
    Location
    Brisbane
    Posts
    777

    Default

    Well I think you might be buggered. The granite will probably be bedded into many dollops of silicone or other adhesive on a substrate of mdf or particle board (or perhaps the kitchen itself). If it's on a substrate, you can unscrew that from the kitchen at least, but the joins in that may not coincide with the joins in the granite either so you'll have to cut it too.

    Cheers
    Michael

  4. #4
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    781

    Default

    Hi and welcome to the forum! I think you will have a lot of trouble getting the granite off but it is always worth the Ole College Try - I have a good mate who is in the business and calling him might help. His name is Dave and his number is 0404 287 549. He is an importer of benchtops, (but in Melbourne so no help in that way for you) - he may be able to offer some insights into what to do. The only thing I can think of is a grout saw to get the joint open, but I have never tried it. Finally, if as mentioned, the solvents are acid based, don't use them - they will stain your granite.

    BTW I went to an importer of granite last week and they showed me a liquid product that they reckon will last ten years, but very few people use it as it is $82 compared with $18 for the regular stuff that lasts 3 months. They showed me their test pieces, stained with sauce, ink and so on - great results....if I can find the name of the stuff I will post it for future reference.

    have fun!
    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

Similar Threads

  1. Kitchen Benchtop Joining
    By mrstevo in forum KITCHENS
    Replies: 10
    Last Post: 24th October 2007, 02:55 PM
  2. Advice on my solid kitchen benchtop plans
    By Trav in forum KITCHENS
    Replies: 8
    Last Post: 25th February 2007, 03:03 AM
  3. Granite Benchtops Information Required
    By stemail23 in forum KITCHENS
    Replies: 21
    Last Post: 1st September 2006, 09:54 PM
  4. Gravel Driveways?
    By JDub in forum LANDSCAPING, GARDENING, OUTDOORS
    Replies: 15
    Last Post: 30th August 2005, 11:21 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •