![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Ridge cap scribe gap?
-
17th December 2010, 08:40 PM #1
Ridge cap scribe gap?
I recently had a new roof installed. How big should the gap between the scribed ridge cap and the metal sheet. The installers appear to have left a pretty big gap at random points all along the ridge cap.
See pic for an example, please note the roof is nearly flat about 3-4 degrees fall at most.
Overall I haven't been too impressed with there workmanship, over tightened screws, a couple of dents in the odd sheet, the list goes on.
SHould I be concerned with the gap in the ridge cap?
Thanks
Attached Thumbnails
Read the full thread at RenovateForum.com...