Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2010
    Location
    RI
    Posts
    2

    Default Parks Super Glaze Problem

    Hello

    I am finishing a table with Parks Super Glaze. While the glaze was drying my garage door was opened during a rain storm. the rain dripped thru the door seams onto my just poured table leaving a number of holes where the water drops displaced the glaze. Anyone have any ideas on how i can smooth the table and refill the holes?

  2. #2
    Join Date
    Sep 2010
    Location
    dubois indiana
    Posts
    1

    Default

    i would love to help ! you can use rough sandpaper to get most of it off as long as you dont sand through the superglaze into the wood. then be shure to wipe it clean ! ive found that nomatter the roughness of the sandpaper it will still be unnoticable when coated again. if there are any holes left fill them first and get the air bubbles out. then repeat what you did before it rained and be shure to keep your garage dore closed.

  3. #3
    Join Date
    Sep 2010
    Location
    RI
    Posts
    2

    Default

    what do you wipe it down with?

Similar Threads

  1. Replies: 8
    Last Post: 11th June 2009, 08:10 AM
  2. Replacing single-glaze with double-glaze
    By zok in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 3
    Last Post: 17th April 2007, 03:11 PM
  3. German Car Parks
    By fred.n in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 2
    Last Post: 19th May 2006, 11:44 AM
  4. National Parks
    By oges in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 4
    Last Post: 7th December 2004, 09:03 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •