![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: NG Rosewood boards
-
26th September 2013, 12:57 PM #1
SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 741
NG Rosewood boards
There are 12 NG Rosewood Boards that would suit smaller projects. Boards are in good condition - although one board has 2 bark inclusions. There is a burl inclusion in one board and a couple of others have a fine fiddleback pattern to them. All boards are 2 side dressed. The average length of the boards would be about 650mm (950mm the longest, 550mm the shortest). All but 3 boards are approx. 135mm wide (the other 3 boards are 115mm wide). Approximate thicknesses are 5 @ 9.5mm, 3 @ 11mm, 4 @ 13mm. I have also thrown in some 2 side dressed lengths of at min. 35 x 35mm NG Rosewood stock (4 @ 650mm long). Pick-up is from Aspley, Northside Brisbane. Unfortunately I will not post or package for a courier. I am not auctioning this bundle, but am selling it for $35. If you would like to "buy it now" for $35, please just say "I'll take it". Thank you.
IMG_2209.jpgIMG_2213.jpgIMG_2215.jpgIMG_2218.jpg
-
27th September 2013, 09:42 AM #2
Senior Member
- Join Date
- Jul 2013
- Location
- The Brisbane Area
- Posts
- 219
-
27th September 2013, 03:18 PM #3
SENIOR MEMBER
- Join Date
- Jun 2013
- Location
- Wurtulla
- Posts
- 741
Rosewood
That would be fine, Emit. I will send you a PM. Thanks.