![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 3 of 3
Thread: Glass cutting - circles
-
17th October 2016, 03:40 PM #1
GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 936
Glass cutting - circles
Does anyone here have experience with cutting circles with glass cutters. I am going to experiment. I have looked at the circle cutters on ebay. The one that looked promising was a oil fed cutter on a pivoting arm.
Looks easy on utube
Suggestions??? Don't do it etc???
Thanks
Lyle.
-
18th October 2016, 08:22 PM #2
GOLD MEMBER
- Join Date
- Oct 2007
- Location
- vic clayton
- Posts
- 680
basically I use a template and a little red devil glass cutter. trace the circle with the glass cutter then slice it up like a pie, I then add a few cross cuts on one wedge then tap that wedge out from as close as I can from the centre and rest tend to come out fairly easily using padded pliers.
if your wanting to cut circles of glass do the wedges on the outside of the circleSome people are like slinkies - not really good for anything, but they
bring a smile to your face when pushed down the stairs .
-
27th October 2016, 07:52 PM #3
Senior Member
- Join Date
- Jun 2012
- Location
- Dungog
- Posts
- 264
How fubar does it.