![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: Mothers day Present
-
12th May 2013, 02:14 PM #1
Mothers day Present
SWMBO is painting some watercolours for the Canberra Botanical Society's exhibition this year. She generally paints on a table top. but her back was suffering.
A tabletop easel was the answer. So my 4 year old commissioned me for the job
Fairly simple design. It's all Red Cedar (I love Red Cedar), which makes it light to move around. It folds completely flat, and will raise to about 90 degrees.
Finished with shellac (I love shellac) and BLO.
Once again .... sorry about my awful photography.
2.jpg3.jpg4.jpg5.jpg
-
12th May 2013, 03:47 PM #2
Hi,
Very nice. I hope it does the trick as the painting isn't too bad either and should be done in comfort.
RegardsHugh
Enough is enough, more than enough is too much.
-
12th May 2013, 06:59 PM #3
-
18th May 2013, 08:02 PM #4
"
Fairly simple design. It's all Red Cedar (I love Red Cedar), which makes it light to move around. It folds completely flat, and will
"
Hi Thumbthumper a Newbie here, couple of questions if thats OK?
1. Where do you buy red Cedar from near Canberra
2. How much did the would in that cost If thats ok to ask?
3. what tools did you use to make it power tools, hand tools?
Thanks
Mike
-
18th May 2013, 11:08 PM #5
Hi Mike,
Red Cedar is hard to find in Canberra.
I have family on the Mid North Coast. My father is a wood turner and is always collecting Cedar when he can. I get a bit off him.
Boutique Timbers in Rollands Plains is worth the drive if you're up on the Mid North Coast.
I use a lot of recycled Cedar from old furniture.
The main board on this easel came from a slab I got from Boutique Timbers. It cost me about $60.
You can see the slab in this thread.
https://www.woodworkforums.com/f173/n...tables-164966/
I'm mostly a hand tool guy. But a band saw is pretty vital to what I do (mainly restoration).