Results 1 to 15 of 28
Thread: Rings on dining table...
-
19th October 2008, 01:46 AM #1New Member
- Join Date
- Oct 2008
- Location
- Bywong NSW
- Posts
- 4
Rings on dining table...
I have recently bought an old Parker double extension dining table, and the teak tabletop has a couple of prominent water stains from glasses or cups.
Any suggestions on removing them, to be done as part of a general refinishing of the table, for which I would also appreciate some advice on the best way of going about tarting it up. Other than the rings, it seems in good condition, but looks pretty dull and lifeless at the moment.
Any advice as to what to use, how to use it, and where to get it, would be appreciated.
(Tried search, and got nothing, which surprised me...)
-
19th October 2008, 09:05 AM #2
Hiya,
My suggestions:
1. Sand away the finish that is there, go gently at it, i.e. make sure it is solid and not veneered. If it's veneered, you'll need to be very gentle sanding down the table.
Or
2. Instead of sanding, give it a light clean when a slightly water-damp cloth to get rid of the grime. Then a polisher reviver might be the next best thing to use.
A little hard to say, without pictures, but hopefully the second option will give you what you want.
and lastly, whatever option, always try out the products on a test piece, or for the table, somewhere inconspicuous first.
cheers
WendyBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
19th October 2008, 09:22 AM #3GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 85
- Posts
- 632
[QUOTE=RufflyRustic;826022]Hiya,
Then a polisher reviver might be the next best thing to use.
Our sponsors product works a treatTom
"It's good enough" is low aim
-
19th October 2008, 09:30 AM #4
Try a search in the forum. It may be a simple fix like spraying hair spray on it. Good luck with it.
-
19th October 2008, 10:29 AM #5machine tech.
- Join Date
- Jan 2004
- Location
- victoria/hughesdale
- Age
- 65
- Posts
- 0
-
19th October 2008, 10:32 AM #6
My option would be to get some 0000 steelwool and some SIFA furniture oil or similar and give it a light polish. This removes all the grime and dull spots and puts some oil back into it. Try it on an out of the way spot first to make sure you are happy with the result.
-
19th October 2008, 10:35 AM #7
PS. the rings can sometimes be taken out by placeing a few layers paper down and then going over with a warm iron.
-
19th October 2008, 07:49 PM #8New Member
- Join Date
- Oct 2008
- Location
- Bywong NSW
- Posts
- 4
Thanks all for the replies.
Yes, it is veneer, which makes me nervous when sanding/rubbing is involved.
Chesand - OK, I'll bite , which sponsor, which product?
I will try the iron and paper trick first, that seems a low risk option.
Thanks again for your quick replies
Ed
-
20th October 2008, 10:00 PM #9Happy Feet
- Join Date
- Sep 2007
- Location
- Armadale
- Posts
- 887
Stop,
The Iron and paper trick is for raw timber stained with oil, dont put a warm iron on any sort of finish unless you know what your doing.
try just rubbing the rings hard enough to generate heat with a bit of olive oil on a rag, this works sometimes
-
21st October 2008, 04:28 PM #10
What Astrid said. A paste of fine cigarette ash can also do the trick if the rings are solely in the finish, although it's apparently socially incorrect to actually have any conveniently lying to hand.
- Andy Mc
-
21st October 2008, 09:20 PM #11
Polish Reviver http://www.ubeaut.com.au/reviver.html made specifically for the purpose.
KEEP A LID ON THE GARBAGE... Report spam, scams, and inappropriate posts, PMs and Blogs.
Use the Report icon at the bottom of all Posts, PM's and Blog entries.
-
21st October 2008, 09:43 PM #12GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 85
- Posts
- 632
-
4th November 2008, 11:35 PM #13Jack of all trades
- Join Date
- Dec 2002
- Location
- Maroochydore, Qld, Aus
- Age
- 73
- Posts
- 0
Yep
Ubeaut polish reviver is one of the best on the market. I sold it for many years in my business and had very positive feedback from all of my customers who tried it.
AJ
-
27th November 2008, 03:03 AM #14New Member
- Join Date
- Nov 2008
- Location
- Hertfordshire
- Posts
- 3
stains on teak wood
We had some black stains on some solid teak garden furniture and we used a special low strength oxylic acid recommended by a carpenter which worked very well. But I would be careful with veneered wood.
-
27th November 2008, 03:43 AM #15Senior Member
- Join Date
- Oct 2008
- Location
- fff
- Posts
- 7
Peanut butter works on some marks.
Similar Threads
-
Dining Table
By ajjsyd in forum FINISHINGReplies: 0Last Post: 15th April 2003, 11:14 PM
Bookmarks