![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 14 of 14
Thread: Hi there, Newbee !!
-
13th November 2013, 12:03 AM #1
Novice
- Join Date
- Nov 2013
- Location
- Glasgow, UK
- Posts
- 2
Hi there, Newbee !!
We're pretty much on the other side of the world (Glasgow, Scotland, UK), me, my workshop and my lathe, a Milford (made in England) yes yes Milford - not Myford...
It's a beautiful lathe, in such wonderful condition, but I find very hard to get any info about it anywhere ! So it gets very hard to buy for. I'm looking for a scroll chuck for it, but even the simple task of finding the right thread is a nightmare !
But it's one of those that is all engineered and beautifully machined...
So any info, anything would be greatly appreciated...
Ps: It's not for sale... ! hihi
-
13th November 2013, 07:03 AM #2
Welcome to the forum.
Take a look at the Metalwork section of the forum. Can be accessed via the drop down menu on the top bar or via this link. METALWORK FORUMS
-
13th November 2013, 08:44 AM #3
Chrisos Christos Christos its a wood lathe Milford
Hi Cello Girl welcome to the mad house as you see above there is a link to a little bit about the Milford not much there sorry.
What size is the spindle thread? adaptors can be made and being in an excellent part of the world for good Scottish engineers you might find someone will to assist.
Give Issac Curran a shout he more local to you then we are and maybe able to help out quicker he has the VB36 which is much like the Milford.
-
13th November 2013, 02:08 PM #4
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum.
-
13th November 2013, 05:00 PM #5
G'Day & Welcome "to the Great South Land" & to a top forum "Wee Scottish Lassie ".
There are quite a few members from Scotland & the UK on the forum as well as across the rest of the world..
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [work in progress] photos with build notes.
Enjoy the forum.
Enjoy woodwork.
Cheers from On Top DownUnder, crowie
-
14th November 2013, 05:45 PM #6
Novice
- Join Date
- Nov 2013
- Location
- Glasgow, UK
- Posts
- 2
Thank you !
Thanks all of you for the warm welcome !
I'm sure I'll get there...
The spindle is 25mm and it very looks like a 8 tpi. Only the other side of the head, for bigger bowls, the thread is different !
I'll definitely talk to an engineer... probably today...
Cheers x
Not really much WIP at the moment, but some of my latest :
(taking a very short break to see if I can get going on turning...)
IMG_3283.JPG
Cello 3 (July 2013)
IMG_3492.JPG
Viola 2 (that is a copy of an existing instrument) (November 2013)
-
14th November 2013, 06:07 PM #7
Novice
- Join Date
- Nov 2013
- Location
- Glasgow, UK
- Posts
- 2
Oh, and I just had a quick pic at Isaac Curran's website.
This is really good, and so close to mine (well an hour drive !)
I'll contact him !... Thanks !!
-
14th November 2013, 07:42 PM #8
Hi Cello Girl, I am not a woodturner but have a reasonable interest in machinery. I find it strange that there is a mix in units for the info supplied by you, mm for diameter and TPI . But I believe that 1inch 8TPI is one of the fairly common spindle thread standards, and is only 0.4mm diameter off what you stated. I suspect that you should be able to get a chuck to suit fairly easily, or alternatively a commercial adaptor to transition from spindle to a locally available chuck. Don't know what your overall plans are, but if you need to go via adaptor, you might want to consider a chuck that mounts directly to the larger thread on the other end of the spindle and an adaptor to let it mount on the near end. As I said, not a woodturner so might be making rubbish suggestions, but I am confident that 1in 8TPI is one of the standard spindles.
Hope you enjoy your time with us.
MalI used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
-
14th November 2013, 10:44 PM #9
Senior Member
- Join Date
- Feb 2011
- Location
- Melbourne
- Age
- 69
- Posts
- 0
Welcome aboard. I agree with Mal, sounds like 1" 8TPI. Try this site:
The Highland Woodturning Club - which has a list of clubs and suppliers who may be able to help.
Os
-
14th November 2013, 10:46 PM #10
Novice
- Join Date
- Nov 2013
- Location
- Glasgow, UK
- Posts
- 2
Dear Mel,
Thank you for your very useful reply. Sorry for the mix of unit. TBH I'm French and (albeit leaving in the UK) I'm very unfamiliar with Imperial. My calliper that I used for measuring the diameter is in mm but I know that tpi used to identify threads on a lathe like mine would be Imperial... Hence the mix...
I have suspected the spindle to be 8tpi at one end so that's half of the problem solved as many chucks come in 8tpi, so loads to choose from. For the other end, I planning a visit to a local (lovely, tiny) metalwork workshop and see if they can make an adaptor for me...
Thank you so much !!
-
14th November 2013, 11:00 PM #11
Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 1,460
Also a warm welcome from me.
Have you been in touch with this crowd as they may be able to help you.
Peter.
-
15th November 2013, 06:50 AM #12
Welcome aboard.
-
15th November 2013, 07:04 AM #13
Novice
- Join Date
- Nov 2013
- Location
- Glasgow, UK
- Posts
- 2
Thanks again.
About the nice Milford on lathes.co.uk... Well it's mine ! Poor Tony I called last year to get info on my lathe didn't ever heard of Milford before ! I ended up sending him pics of mine for his database...
It doesn't look like this anymore (quite) : it's been dusted and professionally reconnected to the mains, I changed the belt so now it runs so smooth !
It's been cleaned and greased and... Well I've used it since... We still need to get to know each other though...
I've decided that the bowl end is a 8tpi so today I've bought a Patriot chuck (Robert Sorby) and corresponding insert (left hand).
The other thread turns out to be 10tpi.
What I would love to do is turn my own pegs for my instruments (and a few bowls when I'm on holiday !)
;-)
-
15th November 2013, 08:48 AM #14
Similar Threads
-
Another Newbee
By sparkie54 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 3Last Post: 28th December 2009, 04:35 AM -
Newbee
By larry1larry in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 6Last Post: 27th December 2009, 12:00 PM